MPL Optimized Performance with MPS Inductor The MP2643 is a highly integrated, bidirectional active balancer that provides up to 2A of charge redistribution among Li-ion, Li-polymer, or lithium iron phosphate batteries in a two-series battery pack. As an alternative to dissipating energy with passive balancing, the MP2643 efficiently moves charge between cells to minimize balancing time and heat generation. The device can also compensate for cell capacity mismatch to extend battery runtime. By combining multiple MP2643 devices, active balancing can be scaled to any number of series cells, and charge can be redistributed to and from any cells within the pack. The MP2643 can balance adjacent cells using two modes: buck-balance mode and boost-balance mode. In buck-balance mode, the MP2643 transfers energy from the upper cell (CU) to the lower cell (CL). In boost-balance mode, the MP2643 transfers energy from CL to CU. To guarantee safe operation, the MP2643 provides CL and CU over-voltage protection (OVP), under-voltage protection (UVP), and thermal shutdown. The MP2643 is available in a QFN-26 (4mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP2643GR-Z is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP2643GR-Z datasheet above.
Electronic component spot-market pricing for MP2643GR-Z fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP2643GR-Z depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Explore MLCC miniaturization through Murata GRM158C80G226ME01D, linking its 22 µF, 4 V, 0402-inch specification to effective capacitance, consumer-use limits and real PCB area.
Read more →
Assess what the proposed Winbond–Infineon NOR Flash transaction means for W25Q64JVSSIQ sourcing, with dated deal status, exact-code checks and a practical alternative-qualification framework.
Read more →
Design an ALDP1F06 driver by checking its 6 V coil, diode-qualified release-time limit, flyback clamp stress, hot restart and the actual contact event required by the appliance.
Read more →
Use TAS5431QPWPRQ1 to assess an eCall speaker connection by interpreting load-test timing, I²C fault bits, open-load reporting and recovery during backup-supply transitions.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 1,460 | ||
| Monolithic Power Systems | 4,610 | |||
| Monolithic Power Systems | -- | 2,920 | ||
| Monolithic Power Systems | -- | 7,510 | ||
| Monolithic Power Systems | -- | 2,260 | ||
| Monolithic Power Systems | -- | 7,710 | ||
| Monolithic Power Systems | -- | 3,130 | ||
| Monolithic Power Systems | -- | 5,000 | ||
| Monolithic Power Systems | -- | 8,400 | ||
| Monolithic Power Systems | -- | 7,050 |
