MPQ5892GVE-xxxx-AEC1-Z

The MPQ5892-AEC1 is a dual-channel, smart high-side switch used in automotive electronic control units (ECUs) and domain control units (DCUs), including body control, advanced driver-assistance systems (ADAS), infotainment, and more. With an integrated N-MOSFET per channel, it can be applied for loads with 5A nominal current. The part provides a compact solution with its QFN-21 (4mmx5mm) package. The MPQ5892-AEC1 provides full protections, including under-voltage protection (UVP), over-voltage protection (OVP), over-current protection (OCP), short-circuit protection (SCP), loss-of-GND protection, and over-temperature protection (OTP). With a SEL pin and a current-sense (CS) pin, the MPQ5892-AEC1 can output the load current or the fault status of the selected channel. The device can also detect if an open load occurs in the off-state. An additional, global FT pin reports any global or channel fault. The device supports both an internal and configurable, high-accuracy external current limit. This helps clamp the inrush current under short-circuit conditions, which improves overall system reliability. In addition, a fast-off function can quickly turn off the device as the channel current increases sharply during a short-circuit. When a bidirectional TVS diode is applied in the system, the part can pass the tests defined in ISO 7637-2 and ISO 16750-2 and withstand a reverse battery connection. The MPQ5892-AEC1 is available in a compact QFN-21 (4mmx5mm) package, and is available in AEC-Q100 Grade 1.