The MP8792 is a fully integrated, high-frequency, synchronous buck converter. It offers a compact solution that can achieve up to 12A of output current (IOUT) across a wide input voltage (VIN) supply range with excellent load and line regulation. The MP8792 operates at a high efficiency across the IOUT load range. The MP8792 adopts internally compensated constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The switching frequency (fSW) can be set to 600kHz, 800kHz, or 1000kHz by configuring the MODE pin, which allows the frequency to remain constant regardless of VIN or the output voltage (VOUT). The VOUT start-up ramp is controlled by an internal timer (1ms), which can be increased by adding a capacitor to the TRK/REF pin. An open-drain power good (PG) signal indicates whether the output is within its nominal voltage range. If the input supply fails to power the MP8792, then the PGOOD pin is clamped to about 0.7V via an external pull-up voltage. Fully integrated protection features include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP). The MP8792 requires a minimal number of readily available, standard external components, and is available in a QFN-21 (3mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP8792GLE-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP8792GLE-P datasheet above.
Electronic component spot-market pricing for MP8792GLE-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP8792GLE-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Explore MLCC miniaturization through Murata GRM158C80G226ME01D, linking its 22 µF, 4 V, 0402-inch specification to effective capacitance, consumer-use limits and real PCB area.
Read more →
Assess what the proposed Winbond–Infineon NOR Flash transaction means for W25Q64JVSSIQ sourcing, with dated deal status, exact-code checks and a practical alternative-qualification framework.
Read more →
Design an ALDP1F06 driver by checking its 6 V coil, diode-qualified release-time limit, flyback clamp stress, hot restart and the actual contact event required by the appliance.
Read more →
Use TAS5431QPWPRQ1 to assess an eCall speaker connection by interpreting load-test timing, I²C fault bits, open-load reporting and recovery during backup-supply transitions.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 6,470 | |||
| Monolithic Power Systems | -- | 7,440 | ||
| Monolithic Power Systems | -- | 6,380 | ||
| Monolithic Power Systems | -- | 6,690 | ||
| Monolithic Power Systems | -- | 5,460 | ||
| Monolithic Power Systems | -- | 2,700 | ||
| Monolithic Power Systems | 1,160 | |||
 | Monolithic Power Systems | 5,310 | |||
| Monolithic Power Systems | -- | 3,450 | ||
| Monolithic Power Systems | 8,740 |
