The MP5415 is a complete power management IC (PMIC) that integrates four high-efficiency, step-down DC/DC converters; five low-dropout (LDO) regulators; and a flexible logic interface. Constant-on-time (COT) control provides fast transient response for the DC/DC converter. The default fixed switching frequency (fSW) (2MHz) during continuous conduction mode (CCM) greatly reduces the external inductor and capacitor values. Full protection features include under-voltage lockout (UVLO) protection, over-current protection (OCP), and thermal shutdown. The output voltage (VOUT) is adjustable via the I2C bus or preset via the one-time programmable (OTP) memory. The start up/shutdown sequence is also configurable via the OTP, or can be controlled via the I2C bus. The buck and LDO output voltages, MODE pin configuration, buck 1 and buck 3 current limits, and the buck and LDO enable functions (ENBUCK/LDO) can be configured via the I2C and OTP. The buck 2 and buck 4 current limits, DVS slew rate, discharge function (DISCHG), system enable function (SYSEN), and the software reset function (SFRST) can be configured via the I2C. The status and ID2 registers can also be read via the I2C. Other parameters such as AUTOON, frequency, PWR on delay, RST delay, pushbutton time, LDORTC VOUT, OTP version, and I2C slave address can only be configured via the OTP. The MP5415 requires a minimal number of external components, and is available in a space-saving QFN-28 (4mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP5415GR-xxxx-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP5415GR-xxxx-P datasheet above.
Electronic component spot-market pricing for MP5415GR-xxxx-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP5415GR-xxxx-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Buying LP8860HQVFPRQ1 for a vehicle display? Check the H-version 80-mA setup, related drivers and build-based demand. Request a project quote.
Read more →
Sourcing TDA21590 for an AI power BOM? Separate the C2i deal from phase, controller and package choices. Request a quote for your approved build.
Read more →
REF200AU is obsolete with no last-time buy. Check sensor headroom, error limits and LM334 redesign differences, then request a quote for existing builds.
Read more →
Buying SX1302IMLTRT for a gateway? Check RF, power and host requirements, compare SX1303 fine timestamping, and request a project-specific quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 3,470 | |||
| Monolithic Power Systems | 9,290 | |||
| Monolithic Power Systems | 9,250 | |||
| Monolithic Power Systems | 5,270 | |||
| Monolithic Power Systems | 3,390 | |||
| Monolithic Power Systems | 4,820 | |||
| Monolithic Power Systems | 1,560 | |||
 | Monolithic Power Systems | 2,970 | |||
| Monolithic Power Systems | -- | 3,420 | ||
| Monolithic Power Systems | 6,740 |
