The MP5017A is a protection device designed to protect circuitry on the output from transients at the input. It also protects the input from unwanted shorts and transients at the output. During start-up, the inrush current is controlled by limiting the slew rate at the output. The slew rate is controlled by a small capacitor connected at the DV/DT pin. The maximum output load is current-limited. The magnitude of the current limit (ILIMIT) is controlled by an external resistor connected between the ILIMIT and GND pins. By controlling the gate voltages via a pair of N-channel MOSFETs, any current flowing from the output to the input is blocked. Under-voltage lockout (UVLO) protection ensures that the input is above the minimum operating threshold before the device starts up. If the input voltage (VIN) exceeds 5.8V, then the output voltage (VOUT) is limited to 5.8V. The SAS/OV pin programs the VIN over-voltage protection (OVP) threshold. The FAULT pin is an open-drain output that goes low if an over-current (OC), over-temperature (OT), or output over-voltage (OV) fault is detected. The MP5017A is available in a QFN-12 (2mmx3mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP5017AGD-Z is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP5017AGD-Z datasheet above.
Electronic component spot-market pricing for MP5017AGD-Z fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP5017AGD-Z depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Explore MLCC miniaturization through Murata GRM158C80G226ME01D, linking its 22 µF, 4 V, 0402-inch specification to effective capacitance, consumer-use limits and real PCB area.
Read more →
Assess what the proposed Winbond–Infineon NOR Flash transaction means for W25Q64JVSSIQ sourcing, with dated deal status, exact-code checks and a practical alternative-qualification framework.
Read more →
Design an ALDP1F06 driver by checking its 6 V coil, diode-qualified release-time limit, flyback clamp stress, hot restart and the actual contact event required by the appliance.
Read more →
Use TAS5431QPWPRQ1 to assess an eCall speaker connection by interpreting load-test timing, I²C fault bits, open-load reporting and recovery during backup-supply transitions.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 2,170 | ||
| Monolithic Power Systems | -- | 7,700 | ||
| Monolithic Power Systems | 5,530 | |||
| Monolithic Power Systems | 9,010 | |||
| Monolithic Power Systems | -- | 6,270 | ||
| Monolithic Power Systems | -- | 9,470 | ||
| Monolithic Power Systems | 5,300 | |||
| Monolithic Power Systems | -- | 5,420 | ||
| Monolithic Power Systems | -- | 5,810 | ||
| Monolithic Power Systems | 2,950 |
