The MP2762A is a highly integrated buck or boost charger IC with narrow voltage DC (NVDC) power path management and USB On-the-Go (OTG) for battery packs with two cells in series. All power MOSFETs are integrated to provide a compact system solution size. The IC can accept a wide range of input voltages for charging, with a maximum of 21V. The device has two operating modes during the charging process: boost charging mode when the input voltage is below 5.75V, and buck charging mode when the input voltage exceeds 8.5V. With the I2C interface, the MP2762A can be flexibly configured to set the parameters in both charging mode and OTG mode. Parameters include the input current limit, input voltage limit, charging current, battery-full voltage, and safety charge timer. It can also provide the operation status through status and fault registers. To guarantee safe operation, the IC limits the die temperature to a preset value of 120°C. Other safety features include input over-voltage protection (OVP), battery OVP, system OVP, thermal shutdown, battery temperature protection, and a configured timer to prevent prolonged charging of a dead battery. To comply with IMVP8 specifications, the IC provides three analog output pins for system power (PSYS), input current (IAM), and battery current (IBM). It also has a processor hot indication pin (PROCHOT(------------------------------)) for system power control. The NVDC power path management regulates the system voltage within a narrow DC range to provide an optimized system bus voltage for the rails at the system bus. With this feature, the system can continue operating even when the battery is completely depleted or removed. The MP2762A is available in a QFN-30 (4mmx5mm) package. Advantages Include: Fully integrated NVDC power path with up to 6A charge current for a 2-cell battery Support for dual-phase operation to allow using 1.0mm height inductors I2C programmable for all charging parameters Compact BOM size with all power FETs integrated Input current and battery current monitor via IAM/IBM pin Integrated 10-bit ADC Up to 5V/3A USB OTG Compact QFN-30 (4mmx5mm) solution size
YG GROUP supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP2762AGV-0000-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP2762AGV-0000-P datasheet above.
Electronic component spot-market pricing for MP2762AGV-0000-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP2762AGV-0000-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Assess LSM6DSV16XTR for robot motion sensing with conditional noise and current figures, OIS range restrictions, FIFO transport calculations and sample-age checks. Compare four related ST sensors without assuming certification or production adoption.
Read more →
Evaluate BTS5030-2EKA for two 12V body-load branches. Review shared thermal loss, lamp inrush, multiplexed diagnosis and the revised 2185 sense ratio without confusing EV forecasts with exact-part demand.
Read more →
Assess what TI's fab expansion means for a TLC555CDR design. Compare exact ordering status, timer behavior and RC tolerance before changing an approved BOM or relying on a delivery promise.
Read more →
Evaluate a DG411AK/883 offer against the circuit it must serve. Compare temperature-dependent leakage, switching behavior, package identity and four nearby models before choosing replenishment or a redesign.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 6,590 | ||
| Monolithic Power Systems | 2,380 | |||
| Monolithic Power Systems | 4,640 | |||
| Monolithic Power Systems | -- | 4,260 | ||
| Monolithic Power Systems | -- | 7,270 | ||
| Monolithic Power Systems | 3,520 | |||
| Monolithic Power Systems | -- | 4,890 | ||
| Monolithic Power Systems | -- | 7,290 | ||
| Monolithic Power Systems | 1,110 | |||
| Monolithic Power Systems | -- | 7,700 |
