The MP2641 is a highly integrated, bidirectional active balancer that provides up to 2A of charge redistribution among Li-ion, Li-polymer, or lithium iron phosphate batteries in a two-series battery pack. As an alternative to dissipating energy with passive balancing, the MP2641 efficiently moves charge between cells to minimize balancing time and heat generation. The device can also compensate for cell capacity mismatch to extend battery runtime. By combining multiple MP2641 devices, active balancing can be scaled to any number of series cells, and charge can be redistributed to and from any cells within the pack. The MP2641 can balance adjacent cells using two operation modes: buck-balance mode and boost-balance mode. In buck-balance mode, the MP2641 transfers energy from the upper cell (CU) to the lower cell (CL). In boost-balance mode, the MP2641 transfers energy from CL to CU. To guarantee safe operation, the MP2641 provides CL and CU over-voltage protection (OVP), under-voltage protection (UVP), and thermal shutdown. The MP2641 is available in a QFN-26 (4mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP2641GR-Z is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP2641GR-Z datasheet above.
Electronic component spot-market pricing for MP2641GR-Z fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP2641GR-Z depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
NGW40T65M3DFP is Nexperia's 650 V, 40 A TO-247 IGBT for servo inverters. Specify load, cooling and short-circuit protection before comparing offers.
Read more →
MT40A2G8SA-062E:F is Micron's 16Gb x8 DDR4-3200 chip. New Manassas output does not guarantee this part; check SA vs AG ball material before buying.
Read more →
TMP116NAIDRVR is TI's TMP116N digital temperature sensor: ±0.3°C max at −25–85°C, 3.3 V. Review PCB heat and fixture error; request a quote.
Read more →
TLC5948APWPR is TI's 16-channel LED driver with dot correction, brightness and fault readback. Check controller, heat and TLC5947 trade-offs.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Monolithic Power Systems | 6,430 | |||
| Monolithic Power Systems | -- | 9,220 | ||
| Monolithic Power Systems | 7,330 | |||
| Monolithic Power Systems | -- | 7,120 | ||
| Monolithic Power Systems | -- | 4,520 | ||
| Monolithic Power Systems | -- | 9,710 | ||
| Monolithic Power Systems | 3,200 | |||
| Monolithic Power Systems | 6,380 | |||
| Monolithic Power Systems | 1,970 | |||
| Monolithic Power Systems | -- | 3,800 |
