The MP2640 is a highly integrated, bidirectional active balancer that enables high current charge redistribution among Li-ion, Li-polymer, or lithium iron phosphate batteries in a two-series battery pack. It also minimizes energy loss and heat. For large battery systems, active balancing dramatically speeds up the balancing process with high efficiency and allows for capacity recovery in stacks of mismatched batteries. The MP2640 can balance adjacent batteries in the stack with two operation modes: buck balance mode and boost balance mode. If MODE is low, the MP2640 works in forward buck balance mode and transfers the mismatch energy from the upper cell (CU) to the lower cell (CL). If MODE is high, the MP2640 works in reverse boost balance mode and transfers the mismatch energy from CL to CU. To guarantee safe operation, the MP2640 provides CL and CU over-voltage protection (OVP), under-voltage protection (UVP), thermal shutdown, and battery temperature monitoring. The MP2640 is available in a QFN-26 (4mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP2640GR-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP2640GR-P datasheet above.
Electronic component spot-market pricing for MP2640GR-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP2640GR-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Explore MLCC miniaturization through Murata GRM158C80G226ME01D, linking its 22 µF, 4 V, 0402-inch specification to effective capacitance, consumer-use limits and real PCB area.
Read more →
Assess what the proposed Winbond–Infineon NOR Flash transaction means for W25Q64JVSSIQ sourcing, with dated deal status, exact-code checks and a practical alternative-qualification framework.
Read more →
Design an ALDP1F06 driver by checking its 6 V coil, diode-qualified release-time limit, flyback clamp stress, hot restart and the actual contact event required by the appliance.
Read more →
Use TAS5431QPWPRQ1 to assess an eCall speaker connection by interpreting load-test timing, I²C fault bits, open-load reporting and recovery during backup-supply transitions.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 7,470 | |||
| Monolithic Power Systems | 4,210 | |||
| Monolithic Power Systems | 7,870 | |||
| Monolithic Power Systems | -- | 6,070 | ||
| Monolithic Power Systems | -- | 6,880 | ||
| Monolithic Power Systems | 5,830 | |||
| Monolithic Power Systems | 6,120 | |||
| Monolithic Power Systems | 9,040 | |||
| Monolithic Power Systems | 3,790 | |||
| Monolithic Power Systems | -- | 6,970 |
