The MP2030 is a very low dropout, dual supply linear regulator. The use of two supplies allows the BIAS to control an NMOS device. The NMOS device supplies power to the load via the IN. In this way the input supply can be just above the desired output, yet still provide very good regulation performance due to the higher bias supply. The BIAS operates from a 2.5V to 5.5V input and regulates the output voltage to as low as 0.9V, and as high as 3.8V. The MP2030 can supply up to 3A of load current with a typical dropout voltage of 150mV. The BIAS runs the internal reference and drive circuitry, while the output current comes directly from the IN for high efficiency regulation. The low bias current of 220uA makes the MP2030 ideal for use in battery-powered applications. The BIAS can be directly applied from the battery while IN is powered from the high efficiency buck regulator. This will reduce the output noise and decoupling capacitor. Other features of MP2030 include thermal overload and current limit protection, power good indicator, stability with ultra low ESR ceramic capacitors as low as 1uF, and fast transient response. The MP2030 is available in 10-pin QFN (3mm x 3mm), and in QFN (5mm x 5mm) packages.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP2030DU-LF-Z is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP2030DU-LF-Z datasheet above.
Electronic component spot-market pricing for MP2030DU-LF-Z fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP2030DU-LF-Z depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Buying LP8860HQVFPRQ1 for a vehicle display? Check the H-version 80-mA setup, related drivers and build-based demand. Request a project quote.
Read more →
Sourcing TDA21590 for an AI power BOM? Separate the C2i deal from phase, controller and package choices. Request a quote for your approved build.
Read more →
REF200AU is obsolete with no last-time buy. Check sensor headroom, error limits and LM334 redesign differences, then request a quote for existing builds.
Read more →
Buying SX1302IMLTRT for a gateway? Check RF, power and host requirements, compare SX1303 fine timestamping, and request a project-specific quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 4,820 | ||
| Monolithic Power Systems | -- | 6,750 | ||
| Monolithic Power Systems | -- | 9,230 | ||
| Monolithic Power Systems | -- | 3,150 | ||
| Monolithic Power Systems | -- | 4,030 | ||
| Monolithic Power Systems | 4,070 | |||
| Monolithic Power Systems | -- | 8,000 | ||
| Monolithic Power Systems | -- | 4,310 | ||
| Monolithic Power Systems | 4,560 | |||
| Monolithic Power Systems | 3,440 |
