The HR1001L is an enhanced LLC controller that provides new, adaptive dead-time adjustment (ADTA) and capacitive mode protection (CMP) features. The HR1001L is the OCP latch-off version of the HR1001B. ADTA inserts a dead time between the two complimentary gate outputs automatically by keeping the outputs off while sensing the dV/dt current of the half-bridge switching node. ADTA features easier design, lower EMI, and higher efficiency. The HR1001L incorporates anti-capacitive mode protection, which prevents potentially destructive capacitive mode switching if the output is shorted or has a severe overload. This feature protects the MOSFET during abnormal conditions, making the converter robust. The device has a programmable oscillator that sets both the maximum and minimum switching frequencies. It starts up at a programmed maximum switching frequency and decays until the control loop takes over to prevent excessive inrush current. The HR1001L enters controlled burst mode at light-load to minimize the power consumption and tighten output regulation. Full protection features include two-level over-current protection (OCP), external-latch shutdown, brown-in/brown-out, capacitive mode protection (CMP), and over-temperature protection (OTP).
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
HR1001L is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official HR1001L datasheet above.
Electronic component spot-market pricing for HR1001L fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for HR1001L depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Explore MLCC miniaturization through Murata GRM158C80G226ME01D, linking its 22 µF, 4 V, 0402-inch specification to effective capacitance, consumer-use limits and real PCB area.
Read more →
Assess what the proposed Winbond–Infineon NOR Flash transaction means for W25Q64JVSSIQ sourcing, with dated deal status, exact-code checks and a practical alternative-qualification framework.
Read more →
Design an ALDP1F06 driver by checking its 6 V coil, diode-qualified release-time limit, flyback clamp stress, hot restart and the actual contact event required by the appliance.
Read more →
Use TAS5431QPWPRQ1 to assess an eCall speaker connection by interpreting load-test timing, I²C fault bits, open-load reporting and recovery during backup-supply transitions.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 9,300 | |||
| Monolithic Power Systems | -- | 6,330 | ||
| Monolithic Power Systems | 6,870 | |||
| Monolithic Power Systems | 5,410 | |||
| Monolithic Power Systems | 4,600 | |||
| Monolithic Power Systems | 2,650 | |||
| Monolithic Power Systems | -- | 4,520 | ||
| Monolithic Power Systems | -- | 3,700 | ||
| Monolithic Power Systems | -- | 5,280 | ||
| Monolithic Power Systems | 5,440 |
