The RTS5444E is an advanced Type-C Controller designed for source-only port applications. It supports USB Type-C Specification Release 1.3 and integrates Configuration Channel (CC) logic, VCONN power switch, VBUS power switch, 5V to 3.3V LDO regulator, and internal oscillator into a single chip.
The RTS5444E supports standard USB, 1.5A and 3A Type-C current mode that can be selected by RP_SEL0/1 pins. When a Type-C sink device is attached and a connection has been established, the #ATTD and #PLG_ORI pins will assert to inform the external controller of an attach event, and notify the plug orientation for USB3.1 SuperSpeed pair routing and connection. #ATTD and #PLG_ORI can also be connected to an external 2:1 MUX for USB3.1 SuperSpeed pair switching in some applications.
The RTS544E will source VCONN on the CCx line if a Type-C device is attached via electronic cables. The integrated VCONN power switch supports up to 300mA source capability and can fully supply all USB3.1 active cables. The fast current limit response can avoid surge current when CCx is shorted to ground. It will effectively prevent the chip from being damaged and prevent 5V_IN voltage from dropping too much. The VCONN switch will be auto-turned off if an overcurrent event has been sustained for 200ms.
The RTS5444E also integrates an ultra-low RDS (ON) power distribution switch. This VBUS power switch supports up to 5V/1.5A source capability and has a current-limit function to protect the power source from overcurrent or hard short conditions. The current limit value is adjusted according to Type-C current mode selected by the RP_SEL pin. It also incorporates over temperature protection and a reverse blocking function. When an overcurrent event occurs, the #FLT pin will assert to inform an external controller after debounce. The external controller can turn off the VBUS power switch by driving the EN pin low, or by leaving the power switch auto turned off after 200ms debounce. The external controller can turn off the VBUS power switch by driving EN pin low, or leave the power switch auto turned off after 200ms debounce. When an over temperature condition arises, the power switch will shut down immediately and the #FLT pin will also assert to inform an external controller after debounce. The power switch will automatically retry to turn on if the EN pin remains high and the temperature decreases to a safe value.
The RTS5444E adopts an industry standard 12-pin QFN 3mm*2mm Green package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
RTS5444E is an authentic electronic component manufactured by Realtek, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official RTS5444E datasheet above.
Electronic component spot-market pricing for RTS5444E fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for RTS5444E depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
RTL8127-CG brings 10GbE to compact PCs, but the PCIe link, switch ports and cabling decide whether you see 10GbE end to end. YG GROUP sources the controller code your platform actually validated. Compare measured throughput with a 5GbE upgrade before selecting hardware, then confirm quantities and required dates.
Read more →
STM32N657X0H3Q brings NPU acceleration to edge AI, but model size, external flash, RAM use and deployment tools decide whether a design fits. YG GROUP therefore quotes the MCU together with your approved memory BOM. Review those constraints before committing, then share exact order codes, quantities and target dates for a sourcing discussion.
Read more →
In a BQ76952PFBR pack, the top cell can receive less average balancing current because measurements interrupt balancing, so configuration matters as much as the part. YG GROUP sources the full part number once settings are defined. Review configuration, timing and thermal limits for your LiFePO4 pack, then share cell count and quantities.
Read more →
LTC4286AUK#PBF protects 48 V AI server boards during live insertion and reports power data over PMBus, but the external MOSFET's safe operating area decides survival. YG GROUP sources the controller for that validated power path. Examine inrush control, MOSFET SOA and Linux telemetry support, then specify the exact QFN variant, quantities and delivery dates.
Read more →Loading related products…
