
MT41K128M16JT-125:K: 2Gb DDR3L-1600 K-Die & IT:K Check
Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
The highly integrated SG5841/J series of PWM controllers provides several features to enhance the performance of flyback converters. To minimize standby power consumption, a proprietary green-mode function provides off-time modulation to continuously decrease the switching frequency at light-load conditions. This green-mode function enables the power supply to meet international power conservation requirements. To further reduce power consumption, SG5841/J is manufactured using the BiCMOS process. This allows a low start-up current, around 14µA, and an operating current of only 4mA. As a result, a large start-up resistance can be used. The SG5841/J built-in synchronized slope compensation achieves stable peak-current-mode control. The proprietary internal sawtooth power-limiter ensures constant output power limit over a wide range of AC input voltages, from 90VAC to 264VAC. SG5841/J provides many protection functions. In addition to cycle-by-cycle current limiting, the internal open-loop protection circuit ensures safety should an open-loop or output-short-circuit failure occur. PWM output is disabled until VDD drops below the UVLO lower limit, then the controller starts again. An external NTC thermistor can be applied for over-temperature protection. SG5841/J is available in an 8-pin DIP or SOP package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
SG5841 is an authentic electronic component manufactured by onsemi, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official SG5841 datasheet above.
Electronic component spot-market pricing for SG5841 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for SG5841 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
Qualifying a KLM8G1GETF-B041 replacement on embedded Linux? Capture CID, EXT_CSD boot registers, raw boot partitions and HS400 timing. Request a quote.
Read more →
Reordering MT25QU02GCBB8E12-0SIT for FPGA or RFSoC boot? Lock 1.8V QU rails, x8 dual-parallel density and 4-die boundary readback. Request a BOM quote.
Read more →
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →Get the latest tech insights
Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| onsemi | 8,260 | ||||
| onsemi | 7,250 | ||||
| onsemi | 3,800 | ||||
| onsemi | 5,960 | ||||
| onsemi | 1,050 | ||||
| onsemi | 5,670 | ||||
| onsemi | 3,500 | ||||
| onsemi | 2,880 | ||||
| onsemi | 4,510 | ||||
| onsemi | 9,640 |