The MPQ5871 is designed as a smart high-side power switch for a nominal 1A load. The device supports a wide 3.5V to 36V input voltage (VIN) range. The MPQ5871 provides a highly efficient and compact solution with a small on resistance (RDS(ON)). The device supports both an internal current limit and a configurable, high-accuracy external current limit. These limits clamp the inrush current under short-circuit conditions, which improves system reliability. An adjustable start-up slew rate also helps to reduce the inrush current during start-up The FT/CS pin provides high-accuracy current sensing, which achieves accurate diagnostics in real time without additional calibration. The voltage on the FT/CS pin represents (1 / KCS) of the load current, where KCS is a constant value across the temperature and supply voltage ranges. The FT/CS pin can report faults by pulling up its voltage. The MPQ5871 provides full diagnostic capabilities when it is in both on and off states. By pulling the DIAG_EN pin up or down, users can enable or disable off-state open-load or battery short detection. If the system does not require off-state diagnostics, turn off this function and reduce the standby current by connecting the DIAG_EN pin to the GND pin. The MPQ5871 is available in a QFN-8 (2mmx2.5mm) package, and it is available in AEC-Q100 Grade 1 and AEC-Q100-012 Test Grade A.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MPQ5871GRPE-AEC1-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MPQ5871GRPE-AEC1-P datasheet above.
Electronic component spot-market pricing for MPQ5871GRPE-AEC1-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MPQ5871GRPE-AEC1-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 6,500 | ||
| Monolithic Power Systems | 2,730 | |||
| Monolithic Power Systems | 4,950 | |||
| Monolithic Power Systems | -- | 5,930 | ||
| Monolithic Power Systems | -- | 1,660 | ||
| Monolithic Power Systems | -- | 9,380 | ||
| Monolithic Power Systems | 1,300 | |||
| Monolithic Power Systems | 1,580 | |||
| Monolithic Power Systems | -- | 3,520 | ||
| Monolithic Power Systems | 6,400 |
