The MPQ2211-AEC1 is a fully integrated, high-frequency, synchronous buck converter. It offers a very compact solution to achieve up to 12A of output current (IOUT) across a wide input voltage (VIN) supply range, with excellent load and line regulation. The MPQ2211-AEC1 operates at high efficiency across a wide IOUT load range. The MPQ2211-AEC1 adopts an internally compensated constant-on-time (COT) control to provide fast transient response and facilitate loop stabilization. Pulse-skip mode (PSM) enables asynchronous operation to optimize light-load efficiency. The MPQ2211-AEC1 has a fixed 2.2MHz frequency, which enables the device’s frequency to remain constant regardless of VIN and the output voltage (VOUT). The VOUT start-up ramp is controlled by an internal 0.9ms timer, which can be lengthened by adding a capacitor on the SSTT pin. An open-drain power good (PG) signal indicates whether the output is within its nominal voltage range. The PG pin is clamped to about 0.7V with an external pull-up voltage if the input supply fails to power the MPQ2211-AEC1. Fully integrated protections include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP). The MPQ2211-AEC1 requires a minimal number of readily available, standard external components, and is available in an LGA-19 (3mmx3.5mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MPQ2211-AEC1 is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MPQ2211-AEC1 datasheet above.
Electronic component spot-market pricing for MPQ2211-AEC1 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MPQ2211-AEC1 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Monolithic Power Systems | -- | 9,410 | ||
| Monolithic Power Systems | 6,910 | |||
| Monolithic Power Systems | -- | 3,200 | ||
| Monolithic Power Systems | -- | 7,860 | ||
| Monolithic Power Systems | -- | 2,800 | ||
| Monolithic Power Systems | 9,560 | |||
| Monolithic Power Systems | 8,090 | |||
| Monolithic Power Systems | -- | 4,260 | ||
| Monolithic Power Systems | -- | 1,360 | ||
| Monolithic Power Systems | 6,180 |
Loading articles…
dsPIC33EP512MC806-I/PT is Microchip's 64-pin motor-control DSC with 4 PWM pairs and 24 analog inputs. Budget shared pins and ADC timing before approval.
Read more →
MPF100TL-FCSG325I is Microchip's PolarFire FPGA with 170 user I/Os and 4 transceiver lanes. Check banks, speed and power before BOM approval.
Read more →
FM25V10-GTR is Infineon's 1 Mbit SPI F-RAM with no EEPROM write wait. See when event logging justifies it and which firmware checks a swap needs.
Read more →
AS4C16M16SA-7TCN is Alliance Memory's 256 Mb, 143 MHz SDR SDRAM rated 0–70°C. Check CAS timing, refresh and init before approving a substitute.
Read more →