
LCMXO2-7000HC-4FTG256I: 3.3V HC Rails, EFB & ftBGA-256
Approving LCMXO2-7000HC-4FTG256I for board I/O bridging? Check 3.3V HC vs 1.2V ZE rails, EFB RXDR bus stalls and FTG256 vs BG256 fit. Request a quote.
Read more →
The MP6602 is a stepper motor driver with a built-in indexer/translator and internal current regulation. The internal current sense means that the MP6602 does not require external current-sense resistors. The MP6602 operates across a 4.5V to 35V input voltage (VIN) range. It can deliver a motor current of up to 4A per phase, depending on the ambient temperature and PCB layout. The MP6602 can operate a bipolar or unipolar stepper motor in full, half-, quarter-, eighth-, 1/16-, and 1/32-step modes. Internal safety and diagnostic features include rotor stall detection, open-load detection, over-current protection (OCP), input over-voltage protection (OVP), under-voltage protection (UVP), thermal warning, ad thermal shutdown. The automatic hold current mode can lower the winding current to automatically save power when a full current is not required, such as when the motor is stopped or lightly loaded. The motor’s back EMF (BEMF) can be measured. The BEMF can be read via the serial interface for advanced diagnostic and control functions. The serial interface sets control modes such as the step mode, direction, and output current. The serial interface can also read diagnostic registers. The STEP and DIR input pins can adjust motor motion without serial bus transactions. The MP6602 is a highly integrated solution for stepper motor driving. It is available in a small QFN-25 (4mmx5mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP6602GV is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Driver ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP6602GV datasheet above.
Electronic component spot-market pricing for MP6602GV fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP6602GV depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Approving LCMXO2-7000HC-4FTG256I for board I/O bridging? Check 3.3V HC vs 1.2V ZE rails, EFB RXDR bus stalls and FTG256 vs BG256 fit. Request a quote.
Read more →
Driving inductive loads with VNLD5300TR-E? Check the 3.5V max input threshold on 3.3V MCUs, 2A–3.8A current limit and thermal restart. Request a quote.
Read more →
Building digital power on STM32G474MET6? Map LQFP80 HRTIM fault pins, verify 512KB dual-bank flash updates and check MET3/RET6 limits. Request a quote.
Read more →
Sourcing ADS1278IPAPT for simultaneous 24-bit DAQ? Compare 144kSPS vs 31mW/ch pin-selected modes, SPI/frame-sync data and PowerPAD. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 7,860 | |||
| Monolithic Power Systems | 8,570 | ||||
| Monolithic Power Systems | -- | 7,290 | |||
| Monolithic Power Systems | 3,770 | ||||
| Monolithic Power Systems | -- | 4,250 | |||
| Monolithic Power Systems | -- | 3,860 | |||
| Monolithic Power Systems | 8,930 | ||||
| Monolithic Power Systems | 7,400 | ||||
| Monolithic Power Systems | -- | 7,480 | |||
| Monolithic Power Systems | -- | 1,630 |