
MT41K128M16JT-125:K: 2Gb DDR3L-1600 K-Die & IT:K Check
Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
The MP6550A is an H-bridge motor driver. The H-bridge consists of four N-channel power MOSFETs and an internal charge pump to generate gate driver voltages. The MP6550A is typically used to drive a brushed DC motor. The MP6550A differs from the MP6550 in that it has different logic input thresholds. The MP6550A operates from a 1.8V to 22V power supply voltage, which can supply an output current (IOUT) of up to 2A according to the logic control. It has a pulse-width modulation (PWM) input interface, which is compatible with industry-standard devices. A very low standby circuit current can be achieved when the device is disabled. An internal current-sensing circuit provides an output with a voltage proportional to the load current. Cycle-by-cycle current regulation and limiting is also provided. These features do not require the use of a low-value shunt resistor. Internal shutdown functions include over-current protection (OCP), short-circuit protection (SCP), under-voltage lockout (UVLO), and over-temperature protection (OTP). The MP6550A requires a minimal number of readily available, standard external components, and is available in a QFN-12 (2mmx2mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP6550AGG-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Driver ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP6550AGG-P datasheet above.
Electronic component spot-market pricing for MP6550AGG-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP6550AGG-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
Qualifying a KLM8G1GETF-B041 replacement on embedded Linux? Capture CID, EXT_CSD boot registers, raw boot partitions and HS400 timing. Request a quote.
Read more →
Reordering MT25QU02GCBB8E12-0SIT for FPGA or RFSoC boot? Lock 1.8V QU rails, x8 dual-parallel density and 4-die boundary readback. Request a BOM quote.
Read more →
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 7,100 | ||||
| Monolithic Power Systems | -- | 6,380 | |||
| Monolithic Power Systems | 7,540 | ||||
| Monolithic Power Systems | -- | 6,330 | |||
| Monolithic Power Systems | -- | 3,440 | |||
| Monolithic Power Systems | -- | 6,540 | |||
| Monolithic Power Systems | -- | 3,310 | |||
| Monolithic Power Systems | -- | 7,790 | |||
| Monolithic Power Systems | -- | 4,100 | |||
| Monolithic Power Systems | -- | 3,560 |