The MP5006 is a protection device designed to protect circuitry on the output (VOUT) from transients on input (VIN). It also protects VIN from undesired shorts and transients coming from the load. At start up, inrush current is controlled by limiting the slew rate at the VOUT. The slew rate is controlled by a small capacitor at the dv/dt pin. The dv/dt pin has an internal circuit that allows the customer to float this pin (no connect) and still receives a 1.4ms ramp time at the VOUT. The max load at the output (VOUT) is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor connected between the ILIMIT pins. An internal charge pump drives the gate of the power device, allowing a very low on-resistance DMOS power FET of just 0.07O. VOUT is protected from VIN being too low or too high. Under Voltage Lockout (UVLO) assures that the input is above the minimum operating threshold, before the power device is turned on. If VIN goes above the high output threshold, the output voltage will be limited.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP5006EQ-LF-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP5006EQ-LF-P datasheet above.
Electronic component spot-market pricing for MP5006EQ-LF-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP5006EQ-LF-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 9,970 | |||
| Monolithic Power Systems | -- | 6,250 | ||
| Monolithic Power Systems | -- | 7,660 | ||
| Monolithic Power Systems | 5,810 | |||
| Monolithic Power Systems | 9,260 | |||
| Monolithic Power Systems | -- | 3,310 | ||
| Monolithic Power Systems | -- | 3,540 | ||
| Monolithic Power Systems | 7,080 | |||
| Monolithic Power Systems | -- | 5,590 | ||
| Monolithic Power Systems | 5,210 |
