
LCMXO2-7000HC-4FTG256I: 3.3V HC Rails, EFB & ftBGA-256
Approving LCMXO2-7000HC-4FTG256I for board I/O bridging? Check 3.3V HC vs 1.2V ZE rails, EFB RXDR bus stalls and FTG256 vs BG256 fit. Request a quote.
Read more →
The MP4816A is a 16-channel high voltage single-pole single-throw, SPST, analog switch with integrated output bleed resistors designed for medical ultrasound imaging applications. It is designed to multiplex the transmit and receive voltages to and from multiple piezoelectric transducers, PZTs. The output switches are controlled by a 16-bit serial shift register followed by a 16-bit data latch. A data out, Dout, pin is provided to allow for multiple devices to be cascaded together. This will help minimize the number of input/output, I/O, control lines. A logic High in the data latch will turn on the corresponding analog switch whereas a logic Low will turn it off. The MP4816A does not require any high voltage supplies. Only two low voltage supplies are required, 3.3V and 10V. The analog switch can block or pass analog voltages up to ±90V with peak currents of up to ±2.0A. The MP4816A is available in TQFP 48-pin7mm x 7mm package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP4816AGFP is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Switch ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP4816AGFP datasheet above.
Electronic component spot-market pricing for MP4816AGFP fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP4816AGFP depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Approving LCMXO2-7000HC-4FTG256I for board I/O bridging? Check 3.3V HC vs 1.2V ZE rails, EFB RXDR bus stalls and FTG256 vs BG256 fit. Request a quote.
Read more →
Driving inductive loads with VNLD5300TR-E? Check the 3.5V max input threshold on 3.3V MCUs, 2A–3.8A current limit and thermal restart. Request a quote.
Read more →
Building digital power on STM32G474MET6? Map LQFP80 HRTIM fault pins, verify 512KB dual-bank flash updates and check MET3/RET6 limits. Request a quote.
Read more →
Sourcing ADS1278IPAPT for simultaneous 24-bit DAQ? Compare 144kSPS vs 31mW/ch pin-selected modes, SPI/frame-sync data and PowerPAD. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 5,650 | ||||
| Monolithic Power Systems | -- | 6,660 | |||
| Monolithic Power Systems | -- | 7,750 | |||
| Monolithic Power Systems | 4,980 | ||||
| Monolithic Power Systems | 8,070 | ||||
| Monolithic Power Systems | -- | 4,070 | |||
| Monolithic Power Systems | -- | 4,590 | |||
| Monolithic Power Systems | 2,840 | ||||
| Monolithic Power Systems | -- | 8,030 | |||
| Monolithic Power Systems | 4,270 |