
MT41K128M16JT-125:K: 2Gb DDR3L-1600 K-Die & IT:K Check
Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
The MP3320A is a 4-channel, self-adaptive, charge pump RGB LED driver that operates across a wide 1.8V to 5.5V input voltage (VIN) range. Each channel can reach a maximum current of up to 51mA and a maximum output voltage (VOUT) of up to 5.5V. The MP3320A integrates a digital interface with up to 16 configurable digital interface addresses via an external resistor. Each channel can be enabled or disabled via the digital interface. The MP3320A employs both separated pulse-width modulation (PWM) dimming and analog dimming for each LED channel, as well as 10-bit PWM dimming and 8-bit analog dimming for each channel. Phase shift is also integrated during PWM dimming to reduce inrush current and eliminate audible noise. To ensure system reliability, the MP3320A integrates rich protections, including LED open protection, LED short protection, over-voltage protection (OVP), and over-temperature protection. The MP3320A is available in a QFN-14 (2mmx2mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP3320AGG-P is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Driver ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP3320AGG-P datasheet above.
Electronic component spot-market pricing for MP3320AGG-P fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP3320AGG-P depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
Qualifying a KLM8G1GETF-B041 replacement on embedded Linux? Capture CID, EXT_CSD boot registers, raw boot partitions and HS400 timing. Request a quote.
Read more →
Reordering MT25QU02GCBB8E12-0SIT for FPGA or RFSoC boot? Lock 1.8V QU rails, x8 dual-parallel density and 4-die boundary readback. Request a BOM quote.
Read more →
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | 6,090 | ||||
| Monolithic Power Systems | -- | 6,520 | |||
| Monolithic Power Systems | 3,660 | ||||
| Monolithic Power Systems | -- | 7,300 | |||
| Monolithic Power Systems | -- | 8,640 | |||
| Monolithic Power Systems | -- | 5,480 | |||
| Monolithic Power Systems | 9,690 | ||||
| Monolithic Power Systems | -- | 8,330 | |||
| Monolithic Power Systems | -- | 3,580 | |||
| Monolithic Power Systems | -- | 4,020 |