
MT41K128M16JT-125:K: 2Gb DDR3L-1600 K-Die & IT:K Check
Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
The MCS1803 is a linear Hall-effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows current to flow close to the IC, which contains high-accuracy Hall-effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall-effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current. A spinning current technique is used for a low stable offset. The galvanic isolation between the pins of the primary conductive path and the sensor leads allows the MCS1803 to replace opto-isolators or other isolation devices. The MCS1803 requires a minimal number of readily available, standard external components. The device’s small footprint saves board area and makes it well-suited for space-constrained applications. The MCS1803 is available in an SOIC-8 package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MCS1803GS is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Current Sensors. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MCS1803GS datasheet above.
Electronic component spot-market pricing for MCS1803GS fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MCS1803GS depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →
Qualifying a KLM8G1GETF-B041 replacement on embedded Linux? Capture CID, EXT_CSD boot registers, raw boot partitions and HS400 timing. Request a quote.
Read more →
Reordering MT25QU02GCBB8E12-0SIT for FPGA or RFSoC boot? Lock 1.8V QU rails, x8 dual-parallel density and 4-die boundary readback. Request a BOM quote.
Read more →
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 4,930 | |||
| Monolithic Power Systems | 3,560 | ||||
| Monolithic Power Systems | 9,760 | ||||
| Monolithic Power Systems | 3,330 | ||||
| Monolithic Power Systems | 5,800 | ||||
| Monolithic Power Systems | 7,490 | ||||
| Monolithic Power Systems | 2,450 | ||||
| Monolithic Power Systems | -- | 3,660 | |||
| Monolithic Power Systems | -- | 9,310 | |||
| Monolithic Power Systems | 5,410 |