
AP64350SP-13
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
The EVQ7210-U-00A is an evaluation board designed to demonstrate the capabilities of the MPQ7210-AEC1, a synchronous, dual-buck LED driver designed to operate as a constant current source. The MPQ7210-AEC1 can drive two independent channels of LEDs. Each channel can support up to 2A of current, and the channels can also be connected in parallel to support up to 4A of current. The MPQ7210-AEC1’s switching frequency (fSW) can be set to 220kHz, 420kHz, 1.1MHz, or 2.3MHz via the one-time programmable (OTP) memory. A higher fSW can be achieved by using a smaller-value inductor and capacitor, but this also leads to power loss and possible thermal issues. High-frequency operation can be selected for high LED current applications. The thermal and cooling conditions should be validated on the system level. The 60V input voltage (VIN) allows a string of up to 12 LEDs to be connected in series per channel. When paired with a matrix manager, such as the MPQ7241-AEC1, the MPQ7210-AEC1 can achieve an ideal architecture for adaptive driving beams and matrix headlights. Protection features include a failsafe (/FS) pin used to report over-current protection (OCP), under-voltage lockout (UVLO), early thermal warning, and thermal shutdown. These features can be used to assist the system in meeting functional safety requirements. An integrated, 10-bit analog-to-digital converter (ADC) monitors VIN, the output voltage (VOUT), the internal bias supply voltage (VCC), and junction temperature (TJ), and logs the data to the internal registers. These diagnostics can be read back by a microcontroller (MCU) via the SPI interface. The SPI interface can also be used to preset dimming profiles and mask undesired signals on the /FS pin. The EVQ7210-U-00A is a fully assembled and tested, dual-buck LED driver evaluation board. It generates an LED current (ILED) up to 2A per channel across a 4.5V to 60V VIN range. The MPQ7210-AEC1 is available in a QFN-26 (5mmx5mm) package with wettable flanks, and is available in AEC-Q100 Grade 1.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ7210-U-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ7210-U-00A datasheet above.
Electronic component spot-market pricing for EVQ7210-U-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ7210-U-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
Stepping 24V or 48V down to 3.3V with MCP1793T-3302H/OT? Calculate SOT-23-5 pass loss vs 100mA rating and compare SOT-223 /DC options. Request a quote.
Read more →
Driving a 16-bit SAR ADC with ADA4807-2ARMZ? Verify half-LSB mux settling and MSOP-8 missing disable pins vs LFCSP-10 idle power. Request a BOM quote.
Read more →
Evaluating STM32H7B0RBT6 for a GUI board? Size 800x480 framebuffers against 1,376KB split SRAM and budget Octo-SPI XiP NOR + loaders. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 6,150 | |||
| Monolithic Power Systems | 5,320 | ||||
| Monolithic Power Systems | -- | 7,820 | |||
| Monolithic Power Systems | -- | 6,310 | |||
| Monolithic Power Systems | -- | 6,440 | |||
| Monolithic Power Systems | -- | 6,640 | |||
| Monolithic Power Systems | -- | 7,620 | |||
| Monolithic Power Systems | -- | 9,050 | |||
| Monolithic Power Systems | -- | 2,420 | |||
| Monolithic Power Systems | -- | 4,960 |