
The EVQ4323-D-01A is an evaluation board designed to demonstrate the capabilities of the MPQ4323GDE-AEC1, a configurable-frequency (350kHz to 2.5MHz), synchronous, step-down switching regulator with integrated, internal high-side MOSFETs (HS-FETs) and low-side MOSFETs (LS-FETs). The MPQ4323-AEC1 provides up to 3A of highly efficient output current (IOUT) with peak current mode control. The wide 3.3V to 36V input voltage (VIN) range and 42V load dump tolerance accommodate a variety of step-down applications in automotive input environments. A 1μA shutdown current (ISD) allows the device to be used in battery-powered applications. High power conversion efficiency across a wide load range is achieved by scaling down the switching frequency (fSW) under light-load conditions to reduce the switching and gate driver losses. An open-drain power good (PG) signal indicates whether the output is within 94.5% to 105.5% of its nominal voltage. Frequency foldback prevents inductor current runaway during start-up. Thermal shutdown provides reliable, fault-tolerant operation. A high duty cycle and low-dropout (LDO) mode are provided for automotive cold-crank conditions. The EVQ4323-D-01A is fully assembled and tested. The MPQ4323-AEC1 is available in a QFN-12 (2mmx3mm) package with wettable flanks.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ4323-D-01A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ4323-D-01A datasheet above.
Electronic component spot-market pricing for EVQ4323-D-01A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ4323-D-01A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
![]() | Monolithic Power Systems | -- | 4,190 | ||
![]() | Monolithic Power Systems | -- | 6,250 | ||
![]() | Monolithic Power Systems | -- | 8,340 | ||
![]() | Monolithic Power Systems | -- | 4,790 | ||
![]() | Monolithic Power Systems | -- | 9,260 | ||
![]() | Monolithic Power Systems | -- | 6,840 | ||
![]() | Monolithic Power Systems | -- | 6,230 | ||
![]() | Monolithic Power Systems | -- | 3,730 | ||
![]() | Monolithic Power Systems | -- | 3,210 | ||
![]() | Monolithic Power Systems | -- | 9,020 |