The EVQ3362-J-00A is an evaluation board designed to demonstrate the capabilities of the MPQ3362, a boost LED driver that is ideal for low-to-high current boost applications. The MPQ3362’s low 0.2V feedback voltage (VFB) offers higher efficiency in white LED (WLED) driver applications. It can regulate the output voltage (VOUT) up to 36V, with up to 95% efficiency. Current mode regulation and external compensation optimize the MPQ3362’s control loop across a wide 3V to 36V input voltage (VIN) range. The MPQ3362 supports analog dimming and pulse-width modulation (PWM) dimming on the EN/DIM pin. A <2kHz input dimming frequency initiates PWM dimming, while a >5kHz input dimming frequency initiates analog dimming. Soft start (SS), cycle-by-cycle current limiting, and VIN under-voltage lockout (UVLO) prevent the device from overstress or damage. This protects the sensitive external circuitry during start-up and underload/overload conditions. The MPQ3362 is available in a TSOT23-8 package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ3362-J-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ3362-J-00A datasheet above.
Electronic component spot-market pricing for EVQ3362-J-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ3362-J-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 6,210 | ||
| Monolithic Power Systems | -- | 1,010 | ||
| Monolithic Power Systems | -- | 4,770 | ||
| Monolithic Power Systems | -- | 7,190 | ||
| Monolithic Power Systems | -- | 8,540 | ||
| Monolithic Power Systems | -- | 8,340 | ||
| Monolithic Power Systems | -- | 4,660 | ||
| Monolithic Power Systems | 3,780 | |||
| Monolithic Power Systems | -- | 8,180 | ||
| Monolithic Power Systems | 7,470 |
