The EVQ2177-QH-00A is an evaluation board designed to demonstrate the capabilities of the MPQ2177GQHE-AEC1, a monolithic, step-down switch-mode converter with built-in internal power MOSFETs. The MPQ2177-AEC1 achieves up to 1A of output current (IOUT) from a 2.5V to 6V input voltage (VIN) range, with excellent load and line regulation. The output voltage (VOUT) can be regulated to as low as 0.6V. A 100% maximum duty cycle can be reached in low-dropout (LDO) mode. Constant-on-time (COT) control offers a simpler control loop and faster transient response. By using VIN feed-forward, the MPQ2177-AEC1 maintains a nearly constant switching frequency (fSW) across the input and load ranges. Forced continuous conduction mode (FCCM) provides a stable frequency and a lower output ripple. An open-drain power good (PG) signal indicates nominal voltage after the soft-start time (tSS) elapses. Once the feedback (FB) voltage (VFB) reaches 90% of the reference voltage (VREF), PG is pulled high. Once VFB drops to 85% of VREF, PG is pulled to GND. Full protection features include cycle-by-cycle current limiting, short-circuit protection (SCP), reliable over-voltage protection (OVP), and auto-recovery thermal protection. The EVQ2177-QH-00A is a fully assembled and tested evaluation board. The MPQ2177-AEC1 is available in a QFN-8 (1.5mmx2mm) package, and it is available in AEC-Q100 Grade 1.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ2177-QH-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ2177-QH-00A datasheet above.
Electronic component spot-market pricing for EVQ2177-QH-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ2177-QH-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 4,090 | ||
| Monolithic Power Systems | -- | 3,730 | ||
| Monolithic Power Systems | -- | 2,340 | ||
| Monolithic Power Systems | -- | 2,500 | ||
| Monolithic Power Systems | -- | 6,080 | ||
| Monolithic Power Systems | -- | 3,250 | ||
| Monolithic Power Systems | 2,310 | |||
| Monolithic Power Systems | -- | 4,100 | ||
| Monolithic Power Systems | -- | 8,970 | ||
| Monolithic Power Systems | -- | 4,050 |
