
AP64350SP-13
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
The MAX98374 is a high-efficiency, mono Class D speaker amplifier featuring dynamic headroom tracking (DHT) and brownout protection. As the power-supply voltage varies due to sudden transients and declining battery life, DHT automatically optimizes the headroom available to the Class D amplifier to maintain a consistent listening experience. A wide 5.5V to 16V supply range allows the device to exceed 16W into an 8Ω load.The flexible digital interface supports either the MIPI SoundWire®compatible interface for audio and control data, or the PCM interface for audio data and a standard I2C interface for control data. The PCM interface supports I2S, left-justified, and TDM audio data formats at 16-, 32-, 44.1-, 48-, 88.2-, and 96kHz sample rates with 16-, 24-, and 32-bit data. In TDM mode, the device can support up to 16 channels of audio data. A unique clocking structure eliminates the need for an external master clock for PCM communication, which reduces pin count and simplifies board layout.Active emissions limiting (AEL), spread spectrum modulation (SSM), and edge rate control minimize EMI and eliminate the need for the output filtering found in traditional Class D devices.Thermal foldback protection ensures robust behavior when the thermal limits of the device are reached. When enabled, it automatically reduces the output power when the temperature exceeds a user specified threshold. This allows for uninterrupted music playback even at high ambient temperatures. Traditional thermal protection is also available in addition to robust overcurrent protection.A flexible brownout-detection engine (BDE) can be programmed to initiate various gain reductions, signal limiting, and clip functions based on supply voltage status. Threshold, hysteresis, and attack/release rates are programmable.The device is available in a 0.4mm pitch, 25-bump waferlevel package (WLP), or in a 0.4mm pitch, 22-pin FCQFN package. The device operates over the extended -40°C to +85°C temperature range.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MAX98374EWA+ is an authentic electronic component manufactured by Analog Devices, categorized under Amplifier ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MAX98374EWA+ datasheet above.
Electronic component spot-market pricing for MAX98374EWA+ fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MAX98374EWA+ depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
Stepping 24V or 48V down to 3.3V with MCP1793T-3302H/OT? Calculate SOT-23-5 pass loss vs 100mA rating and compare SOT-223 /DC options. Request a quote.
Read more →
Driving a 16-bit SAR ADC with ADA4807-2ARMZ? Verify half-LSB mux settling and MSOP-8 missing disable pins vs LFCSP-10 idle power. Request a BOM quote.
Read more →
Evaluating STM32H7B0RBT6 for a GUI board? Size 800x480 framebuffers against 1,376KB split SRAM and budget Octo-SPI XiP NOR + loaders. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | 7,440 | ||||
| Analog Devices | 1,490 | ||||
| Analog Devices | 5,140 | ||||
| Analog Devices | 9,240 | ||||
| Analog Devices | 5,780 | ||||
| Analog Devices | 7,220 | ||||
| Analog Devices | 1,570 | ||||
| Analog Devices | 6,650 | ||||
| Analog Devices | 5,820 | ||||
| Analog Devices | 1,660 |