The MAX6323/MAX6324 microprocessor (µP) supervisory circuits monitor power supplies and µP activity in digital systems. A watchdog timer looks for activity outside an expected window of operation. Six laser-trimmed reset thresholds are available with ±2.5% accuracy from +2.32V to +4.63V. Valid active-low RESET output is guaranteed down to VCC= +1.2V.The active-low RESET output is either push-pull (MAX6323) or open-drain (MAX6324). active-low RESET is asserted low when VCCfalls below the reset threshold, or when the manual reset input (active-low MR) is asserted low. active-low RESET remains asserted for at least 100ms after VCCrises above the reset threshold and active-low MR is deasserted.The watchdog pulse output (active-low WDPO) utilizes an open-drain configuration. It can be triggered either by a fast timeout fault (watchdog input pulses are too close to each other) or a slow timeout fault (no watchdog input pulse is observed within the timeout period). The watchdog timeout is measured from the last falling edge of watchdog input (WDI) with a minimum pulse width of 300ns. Active-low WDPO is asserted for 1ms when a fault is observed. Eight laser-trimmed timeout periods are available.The MAX6323/MAX6324 are offered in a 6-pin SOT23 package and operate over the extended temperature range (-40°C to +125°C).
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MAX6323CUT29+T is an authentic electronic component manufactured by Analog Devices, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MAX6323CUT29+T datasheet above.
Electronic component spot-market pricing for MAX6323CUT29+T fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MAX6323CUT29+T depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | 5,800 | |||
 | Analog Devices | 6,390 | |||
 | Analog Devices | 1,270 | |||
 | Analog Devices | 1,520 | |||
 | Analog Devices | 3,960 | |||
| Analog Devices | 8,820 | |||
 | Analog Devices | 4,560 | |||
 | Analog Devices | 6,840 | |||
| Analog Devices | 2,030 | |||
 | Analog Devices | 3,920 |
