The MAX15157D is the evolution of the MAX15157B HV buck controller family. The MAX15157D implements a single-phase, PWM valley current-mode controller and drives two external power MOSFETs in a buck configuration. The output voltage can be dynamically set through the 1V to 2.2V reference input (REFIN) for modular design support.
The switching frequency is controlled either through external resistor that sets the internal oscillator, or by synchronizing the regulator to an external clock. The device is designed to support 60kHz to 1MHz switching frequencies. The controller has a dedicated undervoltage lockout pin (UVLO) and an accurate enable input threshold for flexible power sequence configuration. The controller also has multiple fault-protection circuits to protect against overcurrent (OCP) adjustable through the ILIM pin, output overvoltage (OVP), input undervoltage (UVLO), and thermal shutdown.
The MAX15157D features an adjustable internal compensation ramp. The device incorporates an accurate current-sense amplifier that reports output current through an analog output (IMON).
The MAX15157D features lossless LS FET RDSONor resistor current sensing. The device allows programmable single-phase or multiphase operation, up to eight interleaved phases, and implements an accurate current balance scheme. The MAX15157D can operate with either discrete inductors or coupled inductors in case of multiphase operation.
The device is available in a 5mm × 5mm, 32-pin TQFN package and supports a -40°C to +125°C junction temperature range.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MAX15157D is an authentic electronic component manufactured by Analog Devices, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MAX15157D datasheet above.
Electronic component spot-market pricing for MAX15157D fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MAX15157D depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | 9,200 | |||
 | Analog Devices | 6,540 | |||
 | Analog Devices | 4,350 | |||
 | Analog Devices | 7,790 | |||
 | Analog Devices | 2,200 | |||
| Analog Devices | 6,410 | |||
 | Analog Devices | 1,120 | |||
 | Analog Devices | 7,900 | |||
 | Analog Devices | 1,870 | |||
| Analog Devices | 9,650 |
