
AP64350SP-13
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
The MAX14807 dual, high-voltage (HV) 2.2A analog pulser generates HV arbitrary waveforms or pulses for driving piezoelectric transducers in ultrasound systems, and requires no external transformer. The device features both analog and digital modes of operation. In analog mode, the device amplifies low-voltage differential analog signals to a high-voltage waveform up to 220VP-Pin the ultrasound frequency range. In digital mode, the device generates a low-voltage (LV) continuous-wave Doppler (CWD) signal or a trilevel HV pulse from low-voltage digital inputs.The MAX14807 features a gain-selectable (28dB or 40dB) differential amplifier and a Class AB push-pull output stage for analog mode operation. The differential amplifier boosts the low-voltage differential signal to HV single-ended signal. The bias current of the Class AB output stage is set by an external resistor. The device has a 25Ω active clamp to ensure a low-impedance path to GND as soon as the HV burst is over. The MAX14807 also features a trilevel digital transmitter for digital mode operation. The digital transmitter can be used in operating modes such as CWD, color flow mode (CFM), and pulsed-wave Doppler (PWD) where pulse shaping is not required, but efficiency and phase noise are the main constraints.A transmit/receive function allows the analog amplifier to enter a low-power mode during receive time to minimize power consumption. Transition between transmit and receive (and vice versa) can be done online during the vector acquisition. Output glitches during transmit/receive commutation are minimized. The MAX14807 features a power off mode to reduce power consumption. In power off mode, both the analog and digital transmitters are in high impedance. The MAX14807 has a bilevel thermal protection. When the die temperature exceeds the thresholds (+120°C or +162°C typ), the corresponding open-drain output asserts.The MAX14807 is available in a 64-pin (10mm x 10mm), TQFP exposed-pad package and is specified over the -40°C to +85°C extended temperature range.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MAX14807ECB+ is an authentic electronic component manufactured by Analog Devices, categorized under Driver ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MAX14807ECB+ datasheet above.
Electronic component spot-market pricing for MAX14807ECB+ fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MAX14807ECB+ depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
Stepping 24V or 48V down to 3.3V with MCP1793T-3302H/OT? Calculate SOT-23-5 pass loss vs 100mA rating and compare SOT-223 /DC options. Request a quote.
Read more →
Driving a 16-bit SAR ADC with ADA4807-2ARMZ? Verify half-LSB mux settling and MSOP-8 missing disable pins vs LFCSP-10 idle power. Request a BOM quote.
Read more →
Evaluating STM32H7B0RBT6 for a GUI board? Size 800x480 framebuffers against 1,376KB split SRAM and budget Octo-SPI XiP NOR + loaders. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | 5,630 | ||||
| Analog Devices | 4,640 | ||||
| Analog Devices | 3,450 | ||||
| Analog Devices | 8,750 | ||||
| Analog Devices | 5,880 | ||||
| Analog Devices | 8,920 | ||||
| Analog Devices | - | 9,220 | |||
| Analog Devices | - | 5,120 | |||
| Analog Devices | -- | 2,160 | |||
| Analog Devices | 1,090 |