
AP64350SP-13
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
The LT1794 is a 500mA minimum output current, dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily compensated for lower gains. The extended output swing allows for lower supply rails to reduce system power. Supply current is set with an external resistor to optimize power dissipation. The LT1794 features balanced, high impedance inputs with low input bias current and input offset voltage. Active termination is easily implemented for further system power reduction. Short-circuit protection and thermal shutdown insure the device’s ruggedness.The outputs drive a 100Ω load to ±11.1V with ±12V supplies, and ±10.9V with a 250mA load. The LT1794, with its increased swing on lower supplies, can be used to upgrade LT1795 line driver applications.The LT1794 is available in the very small, thermally enhanced, 20-lead TSSOP for maximum port density in line driver applications. The 20-lead SW is also available.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
LT1794 is an authentic electronic component manufactured by Analog Devices, categorized under Amplifier ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official LT1794 datasheet above.
Electronic component spot-market pricing for LT1794 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for LT1794 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
Stepping 24V or 48V down to 3.3V with MCP1793T-3302H/OT? Calculate SOT-23-5 pass loss vs 100mA rating and compare SOT-223 /DC options. Request a quote.
Read more →
Driving a 16-bit SAR ADC with ADA4807-2ARMZ? Verify half-LSB mux settling and MSOP-8 missing disable pins vs LFCSP-10 idle power. Request a BOM quote.
Read more →
Evaluating STM32H7B0RBT6 for a GUI board? Size 800x480 framebuffers against 1,376KB split SRAM and budget Octo-SPI XiP NOR + loaders. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | 7,250 | ||||
| Analog Devices | 3,560 | ||||
| Analog Devices | 8,340 | ||||
| Analog Devices | 7,020 | ||||
| Analog Devices | 2,140 | ||||
| Analog Devices | 4,990 | ||||
| Analog Devices | 2,910 | ||||
| Analog Devices | 5,140 | ||||
| Analog Devices | 7,070 | ||||
| Analog Devices | 2,600 |