
AP64350SP-13
Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
The LT1078 is a micropower dual op amp in 8-pin packages including the small outline surface mount package. The LT1079 is a micropower quad op amp offered in the standard 14-pin packages. Both devices are optimized for single supply operation at 5V. ±15V specifications are also provided.Micropower performance of competing devices is achieved at the expense of seriously degrading precision, noise, speed and output drive specifications. The design effort of the LT1078/LT1079 was concentrated on reducing supply current without sacrificing other parameters. The offset voltage achieved is the lowest on any dual or quad nonchopper stabilized op amp—micropower or otherwise. Offset current, voltage and current noise, slew rate and gain bandwidth product are all two to ten times better than on previous micropower op amps.The 1/f corner of the voltage noise spectrum is at 0.7Hz, at least three times lower than on any monolithic op amp. This results in low frequency (0.1Hz to 10Hz) noise performance which can only be found on devices with an order of magnitude higher supply current.Both the LT1078 and LT1079 can be operated from a single supply (as low as one lithium cell or two Ni-Cad batteries). The input range goes below ground. The all-NPN output stage swings to within a few millivolts of ground while sinking current—no power consuming pull down resistors are needed.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
LT1078 is an authentic electronic component manufactured by Analog Devices, categorized under Amplifier ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official LT1078 datasheet above.
Electronic component spot-market pricing for LT1078 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for LT1078 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Regulating a 24V bus with AP64350SP-13? Compare RT/CLK external sync vs internal spread-spectrum EMI, SO-8EP layout and AP64351 pins. Request a quote.
Read more →
Stepping 24V or 48V down to 3.3V with MCP1793T-3302H/OT? Calculate SOT-23-5 pass loss vs 100mA rating and compare SOT-223 /DC options. Request a quote.
Read more →
Driving a 16-bit SAR ADC with ADA4807-2ARMZ? Verify half-LSB mux settling and MSOP-8 missing disable pins vs LFCSP-10 idle power. Request a BOM quote.
Read more →
Evaluating STM32H7B0RBT6 for a GUI board? Size 800x480 framebuffers against 1,376KB split SRAM and budget Octo-SPI XiP NOR + loaders. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | 4,840 | ||||
| Analog Devices | 7,140 | ||||
| Analog Devices | 8,320 | ||||
| Analog Devices | 4,200 | ||||
| Analog Devices | 4,250 | ||||
| Analog Devices | 6,790 | ||||
| Analog Devices | 3,750 | ||||
| Analog Devices | 5,590 | ||||
| Analog Devices | 3,430 | ||||
| Analog Devices | 6,470 |