
LCMXO2-7000HC-4FTG256I: 3.3V HC Rails, EFB & ftBGA-256
Approving LCMXO2-7000HC-4FTG256I for board I/O bridging? Check 3.3V HC vs 1.2V ZE rails, EFB RXDR bus stalls and FTG256 vs BG256 fit. Request a quote.
Read more →
The ADM1172 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is used to enhance the gate of the N-channel FET. When an overcurrent condition is detected, the gate voltage of the FET is reduced to limit the current flowing through the sense resistor. During an overcurrent condition, the TIMER pin capacitor determines the amount of time the FET remains at a current limiting mode of operation until it is shut down. The ON (ON-CLR) pin is the enable input for the device and can be used to monitor the input supply voltage. The ADM1172 operates with a supply voltage ranging from 2.7 V to 16.5 V.The ADM1172 also features a power-fail comparator. The voltage on the PFI pin is compared with an internal 0.6 V reference, and the output of this comparator is presented on the PFO pin. This device is available in two options: the ADM1172-1 with automatic retry for overcurrent fault and the ADM1172-2 with latch-off for an overcurrent fault. Toggling the ON (ON-CLR) pin resets a latched fault. The ADM1172 is packaged in an 8-lead TSOT.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
ADM1172 is an authentic electronic component manufactured by Analog Devices, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official ADM1172 datasheet above.
Electronic component spot-market pricing for ADM1172 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for ADM1172 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Approving LCMXO2-7000HC-4FTG256I for board I/O bridging? Check 3.3V HC vs 1.2V ZE rails, EFB RXDR bus stalls and FTG256 vs BG256 fit. Request a quote.
Read more →
Driving inductive loads with VNLD5300TR-E? Check the 3.5V max input threshold on 3.3V MCUs, 2A–3.8A current limit and thermal restart. Request a quote.
Read more →
Building digital power on STM32G474MET6? Map LQFP80 HRTIM fault pins, verify 512KB dual-bank flash updates and check MET3/RET6 limits. Request a quote.
Read more →
Sourcing ADS1278IPAPT for simultaneous 24-bit DAQ? Compare 144kSPS vs 31mW/ch pin-selected modes, SPI/frame-sync data and PowerPAD. Request a quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | -- | 2,260 | |||
| Analog Devices | 7,770 | ||||
| Analog Devices | -- | 5,530 | |||
| Analog Devices | 2,770 | ||||
| Analog Devices | 2,850 | ||||
| Analog Devices | 9,930 | ||||
| Analog Devices | 1,700 | ||||
| Analog Devices | 9,240 | ||||
| Analog Devices | 8,730 | ||||
| Analog Devices | -- | 8,530 |