MPL Optimized Performance with MPS Inductor The MP8794 is a fully integrated, high-frequency, synchronous buck converter. The device offers a compact solution that achieves up to 20A of output current (IOUT) with excellent load and line regulation across a wide input supply range. The MP8794 operates at a high efficiency across the IOUT load range. The device adopts internally compensated constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The switching frequency (fSW) can be set to 600kHz, 800kHz, or 1000kHz with MODE configuration. This allows the device's frequency to remain constant, regardless of the input voltage (VIN) or output voltage (VOUT). The VOUT start-up ramp is controlled by an internal 1ms timer that can be increased by adding a capacitor to REF/TRK. An open-drain power good (PGOOD) signal indicates whether the output is within its nominal voltage range. PGOOD is clamped to about 0.7V with an external pull-up voltage when the input supply fails to power the MP8794. Full protection features include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP). The MP8794 requires a minimal number of readily available, standard external components, and is available in a QFN-21 (3mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP8794GLE is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP8794GLE datasheet above.
Electronic component spot-market pricing for MP8794GLE fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP8794GLE depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Using PCA9548APW for I2C conflicts? Check channel mapping, STOP timing, voltage translation and the active ,118 reel suffix. Request a quote.
Read more →
Protecting USB 2.0 with USBLC6-2SC6? Check line capacitance, ESD rating, package and layout before you buy, then compare SOT-666. Request a quote.
Read more →
Using ST25DV04KC-IE6T3 for contactless setup? Plan what its 512 bytes, protected areas and 256-byte mailbox must hold before ordering. Request a quote.
Read more →
Standardizing STM32C011F4P6? Check flash pages for stored data, updates and growth, and compare the 32 KB STM32C011F6P6. Request pricing for both.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 8,410 | ||
| Monolithic Power Systems | -- | 4,930 | ||
| Monolithic Power Systems | -- | 4,930 | ||
| Monolithic Power Systems | 7,920 | |||
| Monolithic Power Systems | -- | 1,090 | ||
| Monolithic Power Systems | -- | 4,640 | ||
| Monolithic Power Systems | -- | 1,180 | ||
| Monolithic Power Systems | -- | 5,860 | ||
| Monolithic Power Systems | -- | 7,180 | ||
| Monolithic Power Systems | 3,190 |
