The MP5022C is a hot-swap protection device designed to protect circuitry on its output from transients on its input. The MP5022C also protects its input from unwanted shorts and transients coming from its output. During start-up, inrush current is limited by the slew rate at the output. The slew rate is controlled by an external capacitor at SS. The maximum load at the output is current-limited through sense FET topology. The magnitude of the current limit is controlled by a low-power resistor from ISET to ground. An internal charge pump drives the gate of the power device, allowing a power FET with a very low on resistance of 3mΩ to turn on. The MP5022C includes an IMON option that produces a voltage proportional to the current through the power device set by a resistor from IMON to ground. Full protection features include current limit, thermal shutdown, damaged MOSFET detection, over-voltage protection (OVP), and under-voltage protection (UVP). The MP5022C is available in a QFN-22 (3mmx5mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MP5022C is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MP5022C datasheet above.
Electronic component spot-market pricing for MP5022C fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MP5022C depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 1,280 | ||
| Monolithic Power Systems | -- | 5,200 | ||
| Monolithic Power Systems | 3,790 | |||
| Monolithic Power Systems | -- | 5,430 | ||
| Monolithic Power Systems | -- | 4,980 | ||
| Monolithic Power Systems | -- | 7,510 | ||
| Monolithic Power Systems | 4,540 | |||
| Monolithic Power Systems | -- | 3,990 | ||
| Monolithic Power Systems | -- | 5,700 | ||
| Monolithic Power Systems | 3,520 |
