The HR1001A is the OCP auto-recovery version of the HR1001B. The HR1001A is an enhanced LLC controller, and provides new features including adaptive dead-time adjustment (ADTA) and capacitive mode protection (CMP). Adaptive dead-time adjustment inserts a dead time between the two complimentary gate outputs automatically. This is ensured by keeping the outputs off while sensing the dV/dt current of the half-bridge switching node. The ADTA features easier design, lower EMI, and higher efficiency. The HR1001A incorporates anti-capacitive mode protection, which prevents potentially destructive capacitive mode switching if the output is shorted or has a severe overload. This feature protects the MOSFET during abnormal conditions, making the converter robust. The HR1001A has a programmable oscillator that sets both the maximum and minimum switching frequencies. It starts up at a programmed maximum switching frequency, and decays until the control loop takes over to prevent excessive inrush current. The HR1001A enters a controlled burst mode at light-load to minimize power consumption and tighten output regulation. The device provides rich protection features, including two-level OCP, auto-recovery, external latch shutdown, brown-in/out, CMP, and OTP, improving converter design safety with minimal external components.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
HR1001A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official HR1001A datasheet above.
Electronic component spot-market pricing for HR1001A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for HR1001A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
AS4C16M16SA-7TCN is Alliance Memory's 256 Mb, 143 MHz SDR SDRAM rated 0–70°C. Check CAS timing, refresh and init before approving a substitute.
Read more →
HMC830LP6GETR is ADI's 25–3000 MHz PLL with VCO. Its 2022 LTB has passed; ADF4356 needs board redesign. Plan service stock and request a quote.
Read more →
BQ79718BQPAPRQ1 is TI's AEC-Q100 18S battery monitor with ASIL D capability. See which qualification and safety documents your RFQ should request.
Read more →
BD9G500UEFJ-LAE2 is ROHM's 76V line-B buck converter matching BD9G500EFJ-LAE2 electrical specs. Check board evidence before BOM approval or RFQ.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Monolithic Power Systems | -- | 3,200 | ||
| Monolithic Power Systems | 8,920 | |||
| Monolithic Power Systems | -- | 5,280 | ||
| Monolithic Power Systems | -- | 8,400 | ||
| Monolithic Power Systems | 2,800 | |||
| Monolithic Power Systems | 2,050 | |||
| Monolithic Power Systems | - | 2,480 | ||
| Monolithic Power Systems | 4,080 | |||
| Monolithic Power Systems | 6,030 | |||
| Monolithic Power Systems | -- | 5,520 |
