The HR1000A is a controller designed specifically for the resonant half-bridge topology. It provides two drive-signal channels that output complementary signals at a 50% duty cycle. An internal fixed dead-time of 350ns between the two complementary gate signals guarantees zero-voltage switching during the transient and enables high-frequency operation. The integrated bootstrap diode simplifies the external driving circuit for the high-side switch. It can withstand up to 600V with immunity against high dV/dt noise. Modulating the switching frequency regulates the topology output voltage. A programmable oscillator can set both the maximum and minimum switching frequencies. The IC starts up at the programmed maximum switching frequency and gradually slows until the control loop takes over to prevent excessive inrush current The IC can be forced to enter a controlled burst-mode operation at light-load to minimize the power consumption and tighten output regulation. Protections features—including latched shutdown, auto-recovery, brown-out protection, and over-temperature protection—improve converter design safety without engendering additional circuit complexity. The IC provide 1.5A/2A source/sink capability for both high-side and low-side gate drivers. The HR1000A is available in a SO-16 package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
HR1000AGS-Z is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official HR1000AGS-Z datasheet above.
Electronic component spot-market pricing for HR1000AGS-Z fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for HR1000AGS-Z depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Raptor Lake Next puts DDR4 supply risk back in focus. Compare dated DDR4 vs DDR5 prices, supplier EOL updates and sourcing checks for 2027.
Read more →
Place ISL99390FRZ-TR5935 in a server power tree: a 3–16 V, 90 A smart power stage for controller-led point-of-load conversion, with explicit system limits.
Read more →
Plan MT40A512M16TB-062E:R DDR4 rails, exact TB package, commercial temperature limits and conditional PDN targets without unsupported supply-life forecasts.
Read more →
Use BMP390 pressure data for relative height with explicit weather-reference limits, correct IIR coefficients, conversion timing and enclosure constraints.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 1,870 | ||
| Monolithic Power Systems | 7,880 | |||
| Monolithic Power Systems | 8,290 | |||
| Monolithic Power Systems | -- | 5,950 | ||
| Monolithic Power Systems | 7,340 | |||
| Monolithic Power Systems | -- | 9,170 | ||
| Monolithic Power Systems | -- | 8,910 | ||
| Monolithic Power Systems | -- | 8,120 | ||
| Monolithic Power Systems | -- | 5,040 | ||
| Monolithic Power Systems | -- | 7,150 |
