The EVQ6615-QK-00A is an evaluation board designed to demonstrate the capabilities of the MPQ6615-AEC1, an H-bridge DC motor driver. The MPQ6615-AEC1 operates from an input voltage (VIN) up to 40V. The H-bridge consists of four N-channel power MOSFETs. The internal charge pump generates the gate driver test supply voltages for the high-side MOSFETs (HS-FETs), and a trickle charge circuit maintains sufficient gate driver voltages for 100% duty cycle operation. The current flowing through the two Sx outputs is sensed via the internal current-sensing circuits. Each phase has an output pin (SOx) that sources or sinks a current proportional to each phase’s output current (IOUT). Only the current flowing through the low-side MOSFET (LS-FET) is sensed. This current is sensed in both the forward and reverse directions. Internal safety features include over-current protection (OCP), under-voltage lockout (UVLO) protection, and thermal shutdown. The input control signals for the MPQ6615-AEC1 are applied through the connector on the board. The MPQ6615-AEC1 is designed to drive brushed DC motors, door lock and latch motors, and seat actuators. The MPQ6615-AEC1 is available in a TQFN-26 (6mmx6mm) package with wettable flanks, and it is AEC-Q100 qualified.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ6615-QK-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ6615-QK-00A datasheet above.
Electronic component spot-market pricing for EVQ6615-QK-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ6615-QK-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 4,790 | ||
| Monolithic Power Systems | -- | 1,460 | ||
| Monolithic Power Systems | -- | 8,840 | ||
| Monolithic Power Systems | -- | 2,690 | ||
| Monolithic Power Systems | -- | 8,840 | ||
| Monolithic Power Systems | -- | 1,080 | ||
| Monolithic Power Systems | -- | 5,010 | ||
| Monolithic Power Systems | 8,950 | |||
| Monolithic Power Systems | 3,810 | |||
| Monolithic Power Systems | -- | 4,000 |
