
STM32G474MET6: 184ps HRTIM, Dual-Bank Flash & LQFP80
Building digital power on STM32G474MET6? Map LQFP80 HRTIM fault pins, verify 512KB dual-bank flash updates and check MET3/RET6 limits. Request a quote.
Read more →
The EVQ4430-L-00A evaluation board is designed to demonstrate the capabilities of the MP4430 and the MPQ4430. The MPQ4430 is a configurable-frequency (350kHz to 2.5MHz), synchronous, step-down switching regulator with integrated, internal high-side MOSFET (HS-FET) and low-side MOSFET (LS-FET). It provides up to 3.5A of highly efficient output current (IOUT) with current mode control for fast loop response. The MPQ4430 employs advanced asynchronous modulation (AAM) mode to achieve high efficiency under light-load conditions by scaling down the switching frequency (fSW). This reduces the switching and gate driving losses. The EVQ4430-L-00A is a fully assembled and tested evaluation board. It generates an output voltage (VOUT) of 5V at load currents up to 3.5A across a wide 5V to 36V input voltage (VIN) range. The MPQ4430 is available in a QFN-16 (3mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ4430-L-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ4430-L-00A datasheet above.
Electronic component spot-market pricing for EVQ4430-L-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ4430-L-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Building digital power on STM32G474MET6? Map LQFP80 HRTIM fault pins, verify 512KB dual-bank flash updates and check MET3/RET6 limits. Request a quote.
Read more →
Sourcing ADS1278IPAPT for simultaneous 24-bit DAQ? Compare 144kSPS vs 31mW/ch pin-selected modes, SPI/frame-sync data and PowerPAD. Request a quote.
Read more →
Designing multi-channel RF clocks on LMX2594RHAT? Separate 15GHz phase sync from JESD204B SYSREF capture and lock VQFN-40 reel specs. Request a quote.
Read more →
Approving TMS320F28379DPTPT for production? Verify the 9-pair HLQFP176 ADC map, CPU1/CPU2 IPC boot and PowerPAD solder spec vs ZWT. Request a BOM quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 3,840 | |||
| Monolithic Power Systems | -- | 4,230 | |||
| Monolithic Power Systems | -- | 3,430 | |||
| Monolithic Power Systems | -- | 9,940 | |||
| Monolithic Power Systems | -- | 4,950 | |||
| Monolithic Power Systems | -- | 6,910 | |||
| Monolithic Power Systems | -- | 1,880 | |||
| Monolithic Power Systems | -- | 1,950 | |||
| Monolithic Power Systems | -- | 6,850 | |||
| Monolithic Power Systems | -- | 6,170 |