The EVQ4340A-L-6040-00A evaluation board is designed to demonstrate the capabilities of the MPQ4340A-6040-AEC1, a synchronous, step-down switching regulator with a configurable frequency and integrated, internal high-side and low-side MOSFETs (HS-FET and LS-FET, respectively). The MPQ4340A-6040-AEC1 provides up to 6A of highly efficient output current (IOUT) and employs fixed-frequency, zero-delay pulse-width modulation (PWM) control (ZDPTM), an MPS-exclusive technology that enables near optimal transient response. The wide 3.3V to 36V input voltage (VIN) range accommodates a variety of step-down applications in automotive input environments with 42V load dump support. A 1μA shutdown-mode quiescent current (IQ) allows the device to be used in battery-powered applications. High power conversion efficiency across a wide load range is achieved by scaling down the switching frequency (fSW) under light-load conditions to reduce switching and gate driving losses. An open-drain power good (PG) signal indicates whether the output is within 94% to 106% of its nominal voltage. Thermal shutdown provides reliable, fault-tolerant operation. A high duty cycle and low-dropout (LDO) mode provide support for automotive cold-crank conditions. The EVQ4340A-L-6040-00A is a fully assembled and tested evaluation board. The MPQ4340A-6040-AEC1 is available in a QFN-17 (3mmx4mm) package with wettable flanks, and is available in AEC-Q100 Grade 1.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ4340A-L-6040-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ4340A-L-6040-00A datasheet above.
Electronic component spot-market pricing for EVQ4340A-L-6040-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ4340A-L-6040-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
AS4C16M16SA-7TCN is Alliance Memory's 256 Mb, 143 MHz SDR SDRAM rated 0–70°C. Check CAS timing, refresh and init before approving a substitute.
Read more →
HMC830LP6GETR is ADI's 25–3000 MHz PLL with VCO. Its 2022 LTB has passed; ADF4356 needs board redesign. Plan service stock and request a quote.
Read more →
BQ79718BQPAPRQ1 is TI's AEC-Q100 18S battery monitor with ASIL D capability. See which qualification and safety documents your RFQ should request.
Read more →
BD9G500UEFJ-LAE2 is ROHM's 76V line-B buck converter matching BD9G500EFJ-LAE2 electrical specs. Check board evidence before BOM approval or RFQ.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Monolithic Power Systems | -- | 5,300 | ||
| Monolithic Power Systems | -- | 8,500 | ||
| Monolithic Power Systems | 5,630 | |||
| Monolithic Power Systems | -- | 2,940 | ||
| Monolithic Power Systems | -- | 7,050 | ||
| Monolithic Power Systems | -- | 7,780 | ||
| Monolithic Power Systems | -- | 7,000 | ||
| Monolithic Power Systems | 6,350 | |||
| Monolithic Power Systems | -- | 7,330 | ||
| Monolithic Power Systems | -- | 2,810 |
