The EVQ3326-R-00A is an evaluation board designed to demonstrate the capabilities of the MPQ3326, a 16-channel white LED (WLED) driver that can operate from a wide 4V to 16V input voltage range. The MP3326 applies 16 internal current sources in each LED string terminal. Each channel's LED current is set via an external current-setting resistor. The maximum current for each channel is 50mA (VIN ≥ 4.5V). The device integrates an I2C interface (with up to ten configurable I2C addresses via an external resistor), which allows the MPQ3326 to support up to ten cascaded ICs to drive an LED array. Each channel can be enabled or disabled via the I2C. The MPQ3326 employs separated pulse-width modulation (PWM) dimming and analog dimming, as well as 12-bit resolution PWM dimming and 6-bit analog dimming for each channel. The LED current ramp rate and phase shift can be configured to optimize EMI/EMC performance. The device's RFSH/FLT pin can output a refresh signal. The refresh signal frequency can be set by the register. Full protection features include LED open protection, LED short protection, and over-temperature protection (OTP). If a fault protection is triggered, then the fault indicator pulls low and the corresponding fault register is set. The MPQ3326 is AEC-Q100 qualified, and is available in a QFN-24 (4mmx4mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EVQ3326-R-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EVQ3326-R-00A datasheet above.
Electronic component spot-market pricing for EVQ3326-R-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EVQ3326-R-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 4,450 | ||
| Monolithic Power Systems | -- | 4,710 | ||
| Monolithic Power Systems | -- | 9,900 | ||
| Monolithic Power Systems | -- | 5,360 | ||
| Monolithic Power Systems | -- | 7,190 | ||
| Monolithic Power Systems | -- | 8,780 | ||
| Monolithic Power Systems | 3,860 | |||
| Monolithic Power Systems | -- | 3,390 | ||
| Monolithic Power Systems | 5,140 | |||
| Monolithic Power Systems | 4,210 |
