The EV2790-0000-FP-00A and EV2790-0002-FP-00A are evaluation boards designed to demonstrate the capabilities of the MP2790, a complete analog front-end (AFE) monitoring and protection IC. The MP2790 supports 7-cell to 10-cell series battery packs with outstanding measurement accuracy and a complete set of protection features. The MP2790 measures each cell’s voltage, while also synchronously measuring charge and discharge currents via an external current-sense resistor. The MP2790 includes high-side MOSFET (HS-FET) drivers for charge and discharge control. It also measures die temperature and cell temperature via 4 negative temperature coefficient (NTC) thermistor inputs. The MP2790 contains internal passive balancing MOSFETs capable of driving up to 58mA, and is also capable of driving external balancing transistors for higher currents. The discharge (DSCHG) MOSFET driver includes configurable soft start (SS), which provides controlled start-up and eliminates the need for an external pre-charge circuit. The MOSFET drivers also incorporate over-current protection (OCP), short-circuit protection (SCP), battery under-voltage protection (UVP), battery over-voltage protection (OVP), and high-/low-temperature protection. All of these protections have configurable thresholds. The EV2790-0000-FP-00A and EV2790-0002-FP-00A combine the MP2790 with power MOSFETs and a current-sense resistor to support up to 70A of charge and discharge current. The evaluation board also includes placeholders to add external transistors for higher balancing current, if needed. The EV2790-0000-FP-00A and EV2790-0002-FP-00A can be evaluated by connecting to an 18V to 55V battery pack (or simulated battery pack). The evaluation board requires a computer with an available USB port and the MPS evaluation software installed. An MPS USB-to-I2C/SPI communication interface allows the PC to interface with the MP2790 communication port. The EV2790-0000-FP-00A works with the MP2790DFP-0000 and supports I2C communication. The EV2790-0002-FP-00A works with the MP2790DFP-0002 and supports SPI communication. The MP2790 is available in a TQFP-48 (7mmx7mm) package.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
EV2790-0000-FP-00A is an authentic electronic component manufactured by Monolithic Power Systems, categorized under Development Tools. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official EV2790-0000-FP-00A datasheet above.
Electronic component spot-market pricing for EV2790-0000-FP-00A fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for EV2790-0000-FP-00A depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Choose TPS53513RVER Eco-mode or FCCM using load noise, idle power and startup settings, with clear ripple calculations and practical measurement checks.
Read more →
Route MT41K256M16TW-107:P DDR3L with clear VREF, VTT and ODT roles, byte-lane timing, continuous return paths and a documented initialization and validation plan.
Read more →
Build a recoverable W25Q128JVSIQ firmware update around page boundaries, erase timing, BUSY/SUS status, power-up rules and a preserved bootable image.
Read more →
Check PIC16F84A-04I/P EEPROM completion, WRERR reset limits, watchdog timing and two-slot recovery before treating a configuration update as safely saved.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Monolithic Power Systems | -- | 8,580 | ||
| Monolithic Power Systems | -- | 8,120 | ||
| Monolithic Power Systems | -- | 1,970 | ||
| Monolithic Power Systems | -- | 7,060 | ||
| Monolithic Power Systems | -- | 8,000 | ||
| Monolithic Power Systems | -- | 4,040 | ||
| Monolithic Power Systems | -- | 8,260 | ||
| Monolithic Power Systems | -- | 2,690 | ||
| Monolithic Power Systems | 3,140 | |||
| Monolithic Power Systems | -- | 8,610 |
