
MT25QU512ABB8ESF-0SIT EOL: PCN 36228 SO16W vs TBGA24 BOM
Managing MT25QU512ABB8ESF-0SIT EOL after PCN 36228? Separate post-LTB SO16W lot verification from MT25QU512ABB8E12-0AAT TBGA24 respins. Request a quote.
Read more →
TheUSB5926Cversion contains the latest silicon. All new USB5926 designs should move to this newer "C" version.
Microchip’s USB5926 SmartHub is a 6 port, SuperSpeed (SS), low power, configurable USB3.1 Gen1 hub and fully compliant with USB-IF's USB 3.1 Gen1 specification. The USB5926 also supports Hi-Speed (HS), Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.
Microchip SmartHub's are defined as USB hubs that integrates system levels functions typically associated with a separate MCU or processor. The USB5926 SmartHub enables communication to other peripherals in addition to USB. The USB5926's I/O Bridging capability allows the host to seamlessly interface to peripherals via I2C, SPI or GPIOs over USB. The USB5926 also enable a downstream device to take control of the host system by swapping roles and becoming the host port. USB5926 based systems can also switch between two different hosts if required. This role changing technology is called FlexConnect and can be initiated through hardware or software commands.
New technologies like the USB Type-C connector and power delivery are changing the USB landscape. Designed to simplify the latest USB hub designs, the USB5926 has built in Billboard support giving you the option to offload this function from the power delivery controller onto the hub. In addition, the hub can expand beyond six ports through PortSplitting which allows for embedded applications to only use the interface needed for internal USB connections.
MPLAB® Connect Configurator, Microchip’s proprietary software utility, can be used to program on-chip, One Time Programmable (OTP) ROM for the USB5816 which stores required register settings to ensure the desired start up configuration at power on. All LED, GPIOs and port control signal pins are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5926 can be configured through a series of external low-cost resistor bootstraps. A handful of bootstrap pins are available on the USB5926 to enable standard configurations for GPIOs and downstream ports. No OTP programming required.
*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
USB5926 is an authentic electronic component manufactured by Microchip, categorized under Interface ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official USB5926 datasheet above.
Electronic component spot-market pricing for USB5926 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for USB5926 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Managing MT25QU512ABB8ESF-0SIT EOL after PCN 36228? Separate post-LTB SO16W lot verification from MT25QU512ABB8E12-0AAT TBGA24 respins. Request a quote.
Read more →
Supplying off-board ECU sensors with TLS115D0EJXUMA1? Budget ±5mV reference tracking, PG open-drain diagnostics and DSO-8EP heat. Request a BOM quote.
Read more →
Designing a battery sensor node on STM32L431RCT6? Verify STOP2 board current, LPUART first-frame wake vs EXTI and LQFP64 alternates. Request a quote.
Read more →
Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Microchip | 1,040 | ||||
| Microchip | 2,980 | ||||
| Microchip | 7,950 | ||||
| Microchip | 5,550 | ||||
| Microchip | 3,680 | ||||
| Microchip | 4,280 | ||||
| Microchip | 3,760 | ||||
| Microchip | 4,570 | ||||
| Microchip | 1,820 | ||||
| Microchip | 4,310 |