The MAX16193 is an ultra-high accuracy, dual-channel window-detector supervisor circuit that monitors a system's supply rails for undervoltage and overvoltage faults. Input channel 1 (IN1) monitors low core voltage rails from a 0.6V to 0.9V threshold range with ±0.3% accuracy while input-channel 2 (IN2) monitors higher system rails in a 0.9V to 3.3V threshold range with ±0.3% accuracy. A variety of factory trimmed undervoltage/overvoltage thresholds from ±2% to ±5% are available to accommodate different supply voltages and tolerances.The MAX16193 features two independent, active-low reset outputs. Both reset output are available in either an open-drain or push-pull version. Each reset output asserts low when the corresponding monitored rail falls outside of the undervoltage/overvoltage threshold window. The reset outputs deassert after a factory-set reset timeout period when the corresponding rail voltage returns to its nominal voltage level.The MAX16193 is available in a small, 2mm x 3mm, 8-pin standard TDFN chip-on-lead package for industrial and a side-wettable package for automotive. It can operate over the temperature range of -40°C to +125°C.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MAX16193BATA01+T is an authentic electronic component manufactured by Analog Devices, categorized under Power Management ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MAX16193BATA01+T datasheet above.
Electronic component spot-market pricing for MAX16193BATA01+T fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MAX16193BATA01+T depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | 4,790 | |||
| Analog Devices | 7,210 | |||
| Analog Devices | 2,450 | |||
 | Analog Devices | 9,360 | |||
 | Analog Devices | 3,890 | |||
| Analog Devices | 4,890 | |||
 | Analog Devices | 4,420 | |||
| Analog Devices | 3,270 | |||
 | Analog Devices | 7,540 | |||
| Analog Devices | 6,470 |
Loading articles…
Explore MLCC miniaturization through Murata GRM158C80G226ME01D, linking its 22 µF, 4 V, 0402-inch specification to effective capacitance, consumer-use limits and real PCB area.
Read more →
Assess what the proposed Winbond–Infineon NOR Flash transaction means for W25Q64JVSSIQ sourcing, with dated deal status, exact-code checks and a practical alternative-qualification framework.
Read more →
Design an ALDP1F06 driver by checking its 6 V coil, diode-qualified release-time limit, flyback clamp stress, hot restart and the actual contact event required by the appliance.
Read more →
Use TAS5431QPWPRQ1 to assess an eCall speaker connection by interpreting load-test timing, I²C fault bits, open-load reporting and recovery during backup-supply transitions.
Read more →