
MT25QU512ABB8ESF-0SIT EOL: PCN 36228 SO16W vs TBGA24 BOM
Managing MT25QU512ABB8ESF-0SIT EOL after PCN 36228? Separate post-LTB SO16W lot verification from MT25QU512ABB8E12-0AAT TBGA24 respins. Request a quote.
Read more →
The MAX1361/MAX1362 low-power, 10-bit, 4-channel, analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications. Once configured, monitor mode automatically asserts an interrupt when any analog input exceeds the programmed upper or lower thresholds, without interaction to the host. The MAX1361/MAX1362 respond to the SMBus™ alert, allowing quick identification of the alarming device on a shared interrupt. A programmable delay between monitoring intervals lowers power consumption at reduced monitoring rates.In addition, the MAX1361/MAX1362 integrate an internal voltage reference, a clock, and a 1.7MHz, high-speed, I²C-compatible, 2-wire, serial interface. The optimized interface allows a maximum conversion rate of 94.4ksps in normal mode while reading back the conversion results. Each of the four analog inputs is configurable for single-ended or fully differential operation and unipolar or bipolar operation. Two scan modes utilize on-chip random access memory (RAM) to allow eight conversions of a selected channel or scanning of a group of channels to reduce interface overhead.These devices operate from a single 2.7V to 3.6V (MAX1361) or 4.5V to 5.5V (MAX1362) supply and require only 436µA at the maximum sampling rate of 150ksps in monitor mode and 670µA at the maximum sampling rate of 94.4ksps. AutoShutdown™ powers down the devices between conversions, reducing supply current to less than 0.5µA when idle.The full-scale analog-input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX1361 features a 2.048V internal reference, and the MAX1362 features a 4.096V internal reference.The MAX1361/MAX1362 are available in a 10-pin µMAX® package and are specified over the extended -40°C to +85°C temperature range. For 12-bit applications, refer to the pin-compatible MAX1363/MAX1364 data sheet.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
MAX1361EUB+ is an authentic electronic component manufactured by Analog Devices, categorized under Data Converter ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official MAX1361EUB+ datasheet above.
Electronic component spot-market pricing for MAX1361EUB+ fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for MAX1361EUB+ depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…

Managing MT25QU512ABB8ESF-0SIT EOL after PCN 36228? Separate post-LTB SO16W lot verification from MT25QU512ABB8E12-0AAT TBGA24 respins. Request a quote.
Read more →
Supplying off-board ECU sensors with TLS115D0EJXUMA1? Budget ±5mV reference tracking, PG open-drain diagnostics and DSO-8EP heat. Request a BOM quote.
Read more →
Designing a battery sensor node on STM32L431RCT6? Verify STOP2 board current, LPUART first-frame wake vs EXTI and LQFP64 alternates. Request a quote.
Read more →
Reordering MT41K128M16JT-125:K for embedded boards? Lock 2Gb x16 DDR3L-1600 CL11 timing, :K die, IT:K temp grade and PCN status. Request a lot quote.
Read more →| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
| Analog Devices | 1,220 | ||||
| Analog Devices | 6,700 | ||||
| Analog Devices | 5,780 | ||||
| Analog Devices | 2,510 | ||||
| Analog Devices | 7,220 | ||||
| Analog Devices | 8,000 | ||||
| Analog Devices | 7,600 | ||||
| Analog Devices | 3,170 | ||||
| Analog Devices | 7,980 | ||||
| Analog Devices | 3,980 |