The DS1775 digital thermometer and thermostat provides temperature readings that indicate the device’s temperature. Thermostat settings and temperature readings are all communicated to/from the DS1775 over a simple 2-wire serial interface. No additional components are required; the device is truly a “temperature-to-digital” converter.For applications that require greater temperature resolution, the user can adjust the readout resolution from 9 to 12 bits. This is particularly useful in applications where thermal runaway conditions must be detected quickly.The open-drain thermal alarm output, O.S., becomes active when the temperature of the device exceeds a user-defined temperature TOS. The number of consecutive faults required to set O.S. active is configurable by the user. The device can also be configured in the interrupt or comparator mode, to customize the method which clears the fault condition.As a digital thermometer, the DS1775 is software compatible with the DS75 2-wire thermal watchdog. The DS1775 is assembled in a compact 5-pin SOT23 package, allowing for low-cost thermal monitoring/control in spaceconstrained applications. The low thermal mass allows for time constants previously only possible with thermistors.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
DS1775 is an authentic electronic component manufactured by Analog Devices, categorized under Unclassified. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official DS1775 datasheet above.
Electronic component spot-market pricing for DS1775 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for DS1775 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
MT25QL128ABA1EW9-0SIT is a Micron 128Mb 3V QSPI NOR flash in 8x6mm W-PDFN. Verify 3-byte loader addressing and cold boot on reorder. Request an RFQ today.
Read more →
R7FA8M1AHECFC#BA0 is a Renesas 400MHz LQFP-176 RA8M1 MCU. Compare package and Tj limits against 480MHz BGA specs before ordering. Request a quote today.
Read more →
RTL8127-CG brings 10GbE to compact PCs, but the PCIe link, switch ports and cabling decide whether you see 10GbE end to end. YG GROUP sources the controller code your platform actually validated. Compare measured throughput with a 5GbE upgrade before selecting hardware, then confirm quantities and required dates.
Read more →
STM32N657X0H3Q brings NPU acceleration to edge AI, but model size, external flash, RAM use and deployment tools decide whether a design fits. YG GROUP therefore quotes the MCU together with your approved memory BOM. Review those constraints before committing, then share exact order codes, quantities and target dates for a sourcing discussion.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | -- | 7,710 | ||
 | Analog Devices | 8,190 | |||
 | Analog Devices | -- | 3,380 | ||
 | Analog Devices | -- | 3,240 | ||
 | Analog Devices | 3,580 | |||
 | Analog Devices | -- | 9,770 | ||
 | Analog Devices | -- | 8,090 | ||
 | Analog Devices | -- | 6,000 | ||
| Analog Devices | 8,330 | |||
| Analog Devices | 1,820 |
