The ADAR1000 is a 4-channel, X and Ku frequency band, beamforming core chip for phased arrays. This device operates in half-duplex between receive and transmit modes. In receive mode, input signals pass through four receive channels and are combined and output at the common RF_IO pin. In transmit mode, the RF_IO input signal is split and passes through the four transmit channels. In both modes, the ADAR1000 provides a ≥31 dB gain adjustment range and a full 360° phase adjustment range in each radio frequency (RF) channel, with 6-bit resolution (less than ≤0.5 dB and 2.8°, respectively).A simple 4-wire serial port interface (SPI) controls all of the on-chip registers. In addition, two address pins allow SPI control of up to four devices on the same serial lines. Dedicated transmit and receive load pins also provide synchronization of all ADAR1000 chips in the same array, and a single pin controls fast switching between the transmit and receive modes.The ADAR1000 is fabricated in a silicon-germanium, bipolar CMOS (BiCMOS) process. The device is available in a compact, 88-terminal, 7 mm × 7 mm, LGA package and is specified from −40°C to +85°C.
YG GROUP (YUGUANG INTERNATIONAL(HK)CO.,LTD) supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
ADAR1000 is an authentic electronic component manufactured by Analog Devices, categorized under Unclassified. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official ADAR1000 datasheet above.
Electronic component spot-market pricing for ADAR1000 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for ADAR1000 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Buying GRM155C80J106ME11D for a compact board? Compare effective capacitance, bias and packaging—not 10 µF alone. Send your rail requirements for an RFQ.
Read more →
Sourcing TPS53915RVER for a server rail? Map 12-A loads, bias supplies and PMBus functions before buying. Send your power-rail requirements for an RFQ.
Read more →
Replacing a relay with TPS1HB16AQPWPRQ1? Check inrush, A-version current limits and fault recovery before ordering. Send your 12-V load brief for an RFQ.
Read more →
Adding W5500 Ethernet to an MCU? Budget IPv4 sockets, SPI transfers and buffers before buying the network BOM. Send your board requirements for an RFQ.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | -- | 9,150 | ||
| Analog Devices | 5,870 | |||
| Analog Devices | -- | 7,100 | ||
| Analog Devices | -- | 1,200 | ||
| Analog Devices | 9,400 | |||
 | Analog Devices | -- | 6,750 | ||
| Analog Devices | 2,230 | |||
 | Analog Devices | -- | 6,880 | ||
| Analog Devices | -- | 9,840 | ||
 | Analog Devices | 3,550 |
