The AD5379 contains 40 14-bit DACs in one CSPBGA package. The AD5379 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V, and is achieved with reference voltages of VREF(−) = −3.5 V and VREF(+) = +5 V.The AD5379 offers guaranteed operation over a wide VSS/VDDsupply range from ±11.4 V to ±16.5 V. The output amplifier headroom requirement is 2.5 V operating with a load current of 1.5 mA, and 2 V operating with a load current of 0.5 mA.The AD5379 contains a double-buffered parallel interface in which 14 data bits are loaded into one of the input registers under the control of the WR, CS, and DAC Channel Address Pins A0 to A7. It also has a 3-wire serial interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP®interface standards and can handle clock speeds of up to 50 MHz.The DAC outputs are updated upon reception of new data into the DAC registers. All the outputs can be simultaneously updated by taking the LDAC input low. Each channel has a programmable gain and an offset adjust register.Each DAC output is gained and buffered on-chip with respect to an external REFGND input. The DAC outputs can also be switched to REFGND via the CLR pin.
YG GROUP supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
AD5379 is an authentic electronic component manufactured by Analog Devices, categorized under Data Converter ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official AD5379 datasheet above.
Electronic component spot-market pricing for AD5379 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for AD5379 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Assess LSM6DSV16XTR for robot motion sensing with conditional noise and current figures, OIS range restrictions, FIFO transport calculations and sample-age checks. Compare four related ST sensors without assuming certification or production adoption.
Read more →
Evaluate BTS5030-2EKA for two 12V body-load branches. Review shared thermal loss, lamp inrush, multiplexed diagnosis and the revised 2185 sense ratio without confusing EV forecasts with exact-part demand.
Read more →
Assess what TI's fab expansion means for a TLC555CDR design. Compare exact ordering status, timer behavior and RC tolerance before changing an approved BOM or relying on a delivery promise.
Read more →
Evaluate a DG411AK/883 offer against the circuit it must serve. Compare temperature-dependent leakage, switching behavior, package identity and four nearby models before choosing replenishment or a redesign.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | 4,200 | |||
 | Analog Devices | 3,420 | |||
| Analog Devices | 6,390 | |||
 | Analog Devices | 1,200 | |||
 | Analog Devices | 2,310 | |||
| Analog Devices | -- | 7,470 | ||
 | Analog Devices | 3,720 | |||
| Analog Devices | -- | 8,880 | ||
 | Analog Devices | 4,530 | |||
 | Analog Devices | 7,490 |
