The AD5337 / AD5338 / AD5339 are dual 8-, 10-, and 12-bit buffered voltage output DACs, respectively. Each part is housed in an 8-lead MSOP package and operates from a single 2.5 V to 5.5 V supply, consuming 250 μA at 3 V. On-chip output amplifiers allow rail-to-rail output swing with a slew rate of 0.7 V/μs. A 2-wire serial interface operates at clock rates up to 400 kHz. This interface is SMBus compatible at VDD< 3.6 V. Multiple devices can be placed on the same bus.The references for the two DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneously using the software LDAC function. The parts incorporate a power-on reset circuit to ensure that the DAC outputs power up to 0 V and remain there until a valid write to the device takes place. A software clear function resets all input and DAC registers to 0 V. A power-down feature reduces the current consumption of the devices to 200 nA @ 5 V (80 nA @ 3 V).The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment. The power consumption is typically 1.5 mW at 5 V and 0.75 mW at 3 V, reducing to 1 μW in power-down mode.
YG GROUP supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
AD5339 is an authentic electronic component manufactured by Analog Devices, categorized under Data Converter ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official AD5339 datasheet above.
Electronic component spot-market pricing for AD5339 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for AD5339 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Assess LSM6DSV16XTR for robot motion sensing with conditional noise and current figures, OIS range restrictions, FIFO transport calculations and sample-age checks. Compare four related ST sensors without assuming certification or production adoption.
Read more →
Evaluate BTS5030-2EKA for two 12V body-load branches. Review shared thermal loss, lamp inrush, multiplexed diagnosis and the revised 2185 sense ratio without confusing EV forecasts with exact-part demand.
Read more →
Assess what TI's fab expansion means for a TLC555CDR design. Compare exact ordering status, timer behavior and RC tolerance before changing an approved BOM or relying on a delivery promise.
Read more →
Evaluate a DG411AK/883 offer against the circuit it must serve. Compare temperature-dependent leakage, switching behavior, package identity and four nearby models before choosing replenishment or a redesign.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | 9,410 | |||
| Analog Devices | 2,920 | |||
| Analog Devices | 7,270 | |||
| Analog Devices | 6,890 | |||
 | Analog Devices | 7,680 | |||
| Analog Devices | 4,460 | |||
| Analog Devices | -- | 8,670 | ||
| Analog Devices | 7,100 | |||
| Analog Devices | 9,390 | |||
 | Analog Devices | 9,120 |
