The AD5308 / AD5318 / AD5328 are octal 8-, 10-, and 12-bit buffered voltage output DACs in a 16-lead TSSOP. They operate from a single 2.5 V to 5.5 V supply, consuming 0.7 mA typical at 3 V. Their on-chip output amplifiers allow the outputs to swing rail-to-rail with a slew rate of 0.7 V/μs. The AD5308 / AD5318 / AD5328 use a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards.The references for the eight DACs are derived from two reference pins (one per DAC quad). These reference inputs can be configured as buffered, unbuffered, or VDDinputs. The parts incorporate a power-on reset circuit, which ensures that the DAC outputs power up to 0 V and remain there until a valid write to the device takes place. The outputs of all DACs may be updated simultaneously using the asynchronous LDAC input. The parts contain a power-down feature that reduces the current consumption of the devices to 400 nA at 5 V (120 nA at 3 V). The eight channels of the DAC may be powered down individually.All three parts are offered in the same pinout, which allows users to select the resolution appropriate for their application without redesigning their circuit board.
YG GROUP supports reliable sourcing through quality controls and compliance documentation. Please confirm product requirements, applicable certifications and supporting documents before ordering.
AD5308 is an authentic electronic component manufactured by Analog Devices, categorized under Data Converter ICs. It is supplied in the standard manufacturer-specified package footprint, providing industry-standard mechanical dimensions and terminal configurations for board-level assembly. Full pinout configurations, physical footprint drawings, and rated operating tolerances are documented in the official AD5308 datasheet above.
Electronic component spot-market pricing for AD5308 fluctuates based on real-time global availability, production date codes, minimum order quantities (MOQ), and packaging formats (e.g., Reel, Tube, Tray). Using an RFQ ensures you receive accurate, real-time volume pricing tied to verified, traceable inventory rather than stale catalog estimates.
Lead times for AD5308 depend on whether stock is dispatched from our central hub or regional franchise partners. Ready-to-ship inventory typically leaves the warehouse within 1–3 business days following quality inspection, while factory-direct or back-ordered allocations are confirmed with an estimated ship date upon RFQ reply.
Loading articles…
Loading articles…
Assess XC7Z010-1CLG400I design reuse with checks for the exact target, archived IP, tool releases, PS/PL interfaces, timing and board conditions. Keep global EDA and IP revenue growth separate from device demand or availability.
Read more →
Design MIC95410YFL-TR auxiliary rails by checking IN, VS, CTL, two-stage inrush, thermal paths, and output discharge. Compare four load switches with clear limits.
Read more →
TPS54329DDAR Load-Step Selection: LC Filter, Voltage Budget and Validation
Read more →
Select AD8221ARMZ-R7 for bridge sensing by checking ARM-grade limits, gain, common-mode voltage, reference drive, output swing and ADC loading. Compare four related instrumentation amplifiers without assuming direct replacement.
Read more →Loading related products…
| Picture | Part Number | Manufacturer | PDF / RoHS | Stock | Action |
|---|---|---|---|---|---|
 | Analog Devices | 4,170 | |||
 | Analog Devices | 6,100 | |||
 | Analog Devices | 7,880 | |||
| Analog Devices | 4,970 | |||
 | Analog Devices | -- | 6,250 | ||
| Analog Devices | 3,530 | |||
 | Analog Devices | 1,020 | |||
| Analog Devices | 6,970 | |||
 | Analog Devices | 7,170 | |||
| Analog Devices | 1,800 |
